Table of Contents
Advertisement
Point). The text below will direct you to specific sections of the Settings
Worksheet for entry of the requested values.
4.5.1 Subnet Mask Setting
1. To specify the Subnet Mask setting for the scanner, press <1> in the WLAN Settings menu.
The current Subnet Mask setting setting for your local area network displays in the scanner
information window (Figure 75):
2. Enter the Subnet Mask setting for the wireless scanner into the New field, then press the
<Blue Enter>
key to save the setting and return to the WLAN Settings menu. It must
match the Subnet Mask setting previously assigned in Step 12 in Section 4.2.2 (Installing
and Configuring Access Point). Use the Access Point Subnet Mask setting
in Section 2 of the Settings Worksheet.
76
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Figure 75: SubNet Mask Setting
Advertisement
Table of Contents
