Table of Contents
Advertisement
3.5 Taking Physical Inventory - Inventory Function
(Selection 1)
The Inventory function in the scanner Main Menu (Selection 1) allows you to take
a physical inventory by pointing the scanner at each labeled item and capturing the
associated data. After the captured data has been transmitted to Furniture Wizard, the
inventory balances are automatically updated and adjusted accordingly.
Important Note!!!
Although you can scan several hundred items, in practice you should only scan a
limited group of items at one time. For example, you might scan one area of the
warehouse and then transmit the data. You can then append a group of items to the
current inventory session.
To select, perform and complete this function, do the following:
1. After logging on to the scanner, press <1> (Inventory), followed by the
2. To scan a bar-coded item and capture data, point the top of the scanner towards the
bar code label on item (Figure 42), and then press the yellow Scan key beneath the
information window, making sure the red laser light is beaming across the bar code.
The red button above the information window lights up when the scanner is in the
process of capturing data, and it beeps when it completes the data capture.
24
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
Figure 42: Small Tag
key.
<Blue Enter>
Advertisement
Table of Contents
