Table of Contents
Advertisement
The Firmware Main Menu contains a series of options that allow you to perform the following
functions:
1 Inventory - Allows you to take a physical inventory by pointing the scanner at
each labeled item and capturing the associated data. The inventory balances in
Furniture Wizard are then automatically updated with the captured data.
2 Sale - Allows you to store a running total of items for a customer and
automatically transfer the captured list to a sales invoice.
3 Tag Floor - Allows you to retag items for sales or markdown. The scanner stores
a list of items you picked, and Furniture Wizard uses that data to quickly generate
new tags.
4 Transfer - Allows you to transfer items from one branch to another.
5 Receive PO - Allows you to Receive Purchase Orders.
6 Teach - Allows you to "teach" Furniture Wizard to associate your internally-assigned
bar codes for specific inventory items to the UPC (Universal Product Code) codes
assigned by manufacturers to the items. This allows you to directly scan the
manufacturer's bar code labels when receiving purchased items.
7 Stock Check – Allows you to perform "hands-free" inventory stock checks in
Furniture Wizard simply by scanning the labels on an item.
8 Configure - Allows you to perform scanner configuration tasks that are detailed
and completed in Appendix A: Installation and Configuration.
9 Utilities - Contains utilities that are used on an infrequent basis.
4. Each of the Wireless Scanner menu functions is explained in detail in the sections that
follow. In general, you will perform the following tasks to select, perform and complete a
Firmware menu function:
Select the desired function on the Firmware menu, followed by the
To scan a bar-coded item and capture data, point the top of the scanner towards the
bar code label on item, and then press the yellow Scan key beneath the information
window. The red button above the screen lights up when the scanner is in the
process of capturing data, and it beeps when it completes the data capture.
After you have completed scanning of all desired inventory items, simultaneously
press the <FN Alpha> and <0> keys to transmit the captured data to Furniture Wizard.
Make sure you simultaneously press the <FN Alpha> and <0> keys at
the same time while transmitting the captured data to Furniture Wizard!
Failure to press <FN Alpha> at time of data transmission places the
scanner in alpha mode, which causes only a portion of the captured
data to be properly transmitted to Furniture Wizard!
22
Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
key.
<Blue Enter>
Advertisement
Table of Contents
