Omron SYSDRIVE 3G3JV User Manual page 59

Preparing for Operation and Monitoring
Appearance
Note For safety's reasons, the reset will not work while a RUN command (forward or reverse) is in ef-
fect. Wait until the RUN command is OFF before resetting the Inverter.
Name
Enter Key
RUN Key
STOP/RESET Key
Enters multi-function monitor numbers, parameter
numbers, and internal data values after they are set or
changed.
Starts the Inverter running when the 3G3FV is in operation
with the Digital Operator.
Stops the Inverter unless n06 is set to disable the STOP
Key. Functions as a Reset Key when an Inverter error
occurs. (See note.)
Chapter 3
Function
3-3