1.2 Cli Command Modes - TP-Link JetStream TL-SL5428E Cli Reference Manual

TL-SL5428E JetStream L2 Managed Switch CLI Guide
Figure 1-13 Enter into the User EXEC Mode
3. When entering enable command to access Privileged EXEC Mode, you are required to give
the password 123 you have set through Console port connection.
Figure 1-14 Enter into the Privileged EXEC Mode
Now you can manage your switch with CLI commands through Telnet connection.
Note:
You can refer to Chapter 11 User Manage Commands for detailed commands information of the
Telnet connection configuration.

1.2 CLI Command Modes

The CLI is divided into different command modes: User EXEC Mode, Privileged EXEC Mode,
Global Configuration Mode, Interface Configuration Mode and VLAN Database (VLAN
Configuration Mode). Interface Configuration Mode can also be divided into Interface fastEthernet,
Interface gigabitEthernet, Interface link-aggregation and some other modes, which is shown as the
following diagram.
10