Lacp Port-Priority; Show Etherchannel - TP-Link JetStream TL-SL3452 Reference Manual

Command Mode
Global Configuration Mode
Example
Configure the LACP system priority as 1024 globally:
TL-SL3428(config)#lacp system-priority 1024

lacp port-priority

Description
The lacp port-priority command is used to configure the LACP system priority
globally. To return to the default configurations, please use no lacp
port-priority command.
Syntax
lacp port-priority pri
no lacp port-priority
Parameter
pri —— The port priority, ranging from 0 to 65535. It is 32768 by default.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEhternet)
Example
Configure the LACP port priority as 1024 for Fast Ethernet port 1:
TL-SL3428(config)#interface fastEthernet 1/0/1
TL-SL3428(config-if)#lacp port-priority 1024

show etherchannel

Description
The show etherchannel command is used to display the EtherChannel
information.
Syntax
show etherchannel [channel-group-num ] { detail | summary }
Parameter
channel-group-num —— The EtherChannel Group number, ranging from 1 to
TL-SL3428/TL-SL3452
39
JetStream L2 Managed Switch CLI Guide