Chapter 9 Binding Table Commands; Ip Source Binding - TP-Link JetStream TL-SL3452 Reference Manual

Chapter 9
You can bind the IP address, MAC address, VLAN and the connected Port number of the Host
together, which can be the condition for the ARP Inspection and IP verify source to filter the
packets.

ip source binding

Description
The ip source binding command is used to bind the IP address, MAC address,
VLAN ID and the Port number together manually. You can manually bind the IP
address, MAC address, VLAN ID and the Port number together in the condition
that you have got the related information of the Hosts in the LAN. To delete the
IP-MAC –VID-PORT entry from the binding table, please use no ip source
binding index command.
Syntax
ip source binding hostname ip-addr mac-addr vlan vid interface
{ fastEthernet port | gigabitEthernet port } { none | arp-detection }
[ forced-source {arp-scanning | dhcp-snooping} ]
no ip source binding index idx
Parameter
hostname ——The Host Name, which contains 20 characters at most.
ip-addr —— The IP address of the Host.
mac-addr —— The MAC address of the Host.
vid ——The VLAN ID needed to be bound, ranging from 1 to 4094.
port —— The number of port connected to the Host.
none | arp-detection ——The protect type for the entry. "arp-detection" indicates
ARP detection.
forced-source —— The source of the binding entry can be specified as
"arp-scanning" or "dhcp-snooping". It is multi-optional.
idx —— The entry number needed to be deleted. You can use the
source binding
the actual number in the binding table which is not display in an arranged order.
TL-SL3428/TL-SL3452
Binding Table Commands
command to get the idx. Pay attention that the entry number is
JetStream L2 Managed Switch CLI Guide
50
show ip