Location - TP-Link JetStream TL-SL3452 Reference Manual

Syntax
hostname hostname
no hostname
Parameter
hostname —— System Name, ranging from 1 to 32 characters. It is the
product name by default. Here it is TL-SL3428.
Command Mode
Global Configuration Mode
Example
Configure the system name as TPLINK:
TL-SL3428(config)#hostname TPLINK

location

Description
The location command is used to configure the system location. To clear the
system location information, please use no location command.
Syntax
location location
no location
Parameter
location —— Device Location. It consists of 32 characters at most. It is
SHENZHEN by default.
Command Mode
Global Configuration Mode
Example
Configure the system location as GUANGZHOU:
TL-SL3428(config)#location GUANGZHOU
TL-SL3428/TL-SL3452
102
JetStream L2 Managed Switch CLI Guide