2.
You are prompted to enter the connection password 123 you have set through Console port
connection, and then you are in User EXEC Mode.
3.
When entering enable command to access Privileged EXEC Mode, you are required to give
the password 123 you have set through Console port connection.
Now you can manage your switch with CLI commands through Telnet connection.
Note:
You can refer to
Chapter 11 User Manage Commands
Telnet connection configuration.
TL-SL3428/TL-SL3452
Figure 1-12 Connecting to the Switch
Figure 1-13 Enter into the User EXEC Mode
Figure 1-14 Enter into the Privileged EXEC Mode
JetStream L2 Managed Switch CLI Guide
for detailed commands information of the
9