Motion Settings
The Motion settings allow you to set up various Motion
activation services.
1. From the main Home screen, touch
Motion.
2. Touch Motion activation to activate the feature. A
checkmark indicates activation.
3. Touch the
the following options:
• Tilt to zoom: allows you to use the Tilt feature to reduce or
enlarge the screen when in Gallery or Browser. Tap Tilt to zoom,
then tap Sensitivity and set the sensitivity using the slider. A
checkmark appears in the Use motion box. Tap Learn about tilt
for more information.
• Pan to edit: allows you to use the Panning feature to move
icons from one page to another in Home and Application edit
mode. Tap Pan to edit, then tap Sensitivity and set the
sensitivity using the slider. Tap Learn about panning for more
information.
Settings
OFF / ON icon to activate each of
Developer Options
Use the Developer options to set options for application
development.
USB Debugging
When enabled, this allows debugging when the device is
attached to a PC by a USB cable.
Note: This setting is used for development purposes.
1. From the main Home screen, touch
Developer options.
2. Touch USB debugging to enable or disable the setting. A
check mark displays to indicate activation.
Development Device ID
The identification number for your tablet when using it as a
development tool displays in this field.
Allow Mock Locations
This setting is used by developers when developing location-
based applications.
Note: setting is used for development purposes.
Settings
Settings
130