Intermec PB22 User Manual page 63

PB22/PB32 Mobile Label and Receipt Printer User's Guide
Print Speed and Resolution
Print speed:
Resolution:
Print Technology
Printhead:
Maximum print width:
Media Specification
Minimum gap and black mark length:
Minimum gap, black mark, and notch length:
Minimum notch length:
Minimum notch width:
Black mark width:
Core inside diameter:
Roll outside diameter:
Tracking1:
Minimum caliper for label with liner and
receipts:
Maximum caliper for label with liner and
rein))ceipts:
Maximum media length
Receipt roll stock media is supplied as a continuous roll. Label, tag,
and fanfold media use repeat indicators for non-continuous media.
Gap, notch, and black marks are used as repeat indicators:
Gap: Label and fanfold media
•
• Notch: Tag media
• Black mark: Label, tag, and fanfold media
Here are a few things to keep in mind when ordering media for the
PB22/PB32 printer:
Black marks can be sensed on the front or back side of the media.
•
Appendix A — Specifications
4 ips (100 mm/s)
203 dpi (8 dots/mm)
Direct thermal
PB22 48mm (1.8 in)
PB32 72mm (2.8 in)
3.17 mm (0.125 in)
12.7 mm (0.50 in)
6.35 mm (0.25 in)
12.7 mm (0.50 in)
Full width of media
19.05 mm (0.75 in)
PB22 57.15 mm (2.25 in)
PB32 67.31 mm (2.65 in)
Center
0.05 mm (0.002 in)
0.165 mm (0.0065 in)
609.6 mm (24.0 in)
55