Intermec PB21 User Manual

Intermec PB21 User Manual

Mobile receipt printer
Hide thumbs Also See for PB21:
Table of Contents

Advertisement

Quick Links

PB 21 | PB 31
Mobile Receipt Printer
User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PB21 and is the answer not in the manual?

Questions and answers

Summary of Contents for Intermec PB21

  • Page 1 PB 21 | PB 31 Mobile Receipt Printer User’s Guide...
  • Page 2 Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. © 2009–2011 by Intermec Technologies Corporation. All rights reserved.
  • Page 3 Description of Change 5/2011 Revised battery information. Added procedures for configuring wireless network with PrintSet. 1/2010 Revised to add information for the magnetic stripe reader, smart card reader, and upgrading the firmware. PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 4 PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 5: Table Of Contents

    ..... 1 Introducing the PB21 and PB31 Mobile Receipt Printer ......2 What’s New .
  • Page 6 Cleaning the Printhead ........... 64 PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 7 ..............85 PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 8 Contents viii PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 9: Before You Begin

    Returns and Repairs > Warranty. Web Support Visit the Intermec web site at www.intermec.com to download our current manuals (in PDF). To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor. PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 10: Telephone Support

    This user’s guide is for the person who is responsible for installing, configuring, and maintaining the PB21/PB31 printer. This guide provides you with information about the features of the PB21/PB31, and how to install, configure, operate, maintain, and troubleshoot it. PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 11: Related Documents

    Before You Begin Related Documents This table contains a list of related Intermec documents and their part numbers. Document Title Intermec Fingerprint Command Reference Manual Intermec Fingerprint Programmer’s Developer’s Guide Intermec Printer Language (IPL) Developer’s Guide Intermec Printer Language (IPL) Command Reference Manual ESC/P Programmer’s Reference Manual...
  • Page 12 Before You Begin PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 13: Using The Pb21 And Pb31 Mobile Receipt Printer

    Using the PB21 and PB31 Mobile Receipt Printer Use this chapter to familiarize yourself with the PB21 and PB31 mobile receipt printer. In this chapter you will find these sections: • Introducing the PB21 and PB31 Mobile Receipt Printer •...
  • Page 14: Introducing The Pb21 And Pb31 Mobile Receipt Printer

    Introducing the PB21 and PB31 Mobile Receipt Printer The PB21 and PB31 is a rugged mobile receipt printer that is designed for use with Intermec mobile computers, Intermec vehicle mount computers, and SF51 and SR61 scanners. The PB21 uses 50.8 mm (2 in) media and the PB31 uses 76.2 mm (3 in) media.
  • Page 15: Identifying The Parts Of The Printer

    Standby button Information Setup button button PB21 and PB31 : This illustration shows the important features of the printer. A weather-resistant flap protects the communications ports and the external power connector. PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 16: Understanding The Control Panel

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Understanding the Control Panel The printer control panel contains four buttons, a liquid crystal display (LCD), and one LED indicator. Use the four buttons to navigate the menu system and perform functions on the PB2 and PB31 printer.
  • Page 17 Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Understanding How to Use the PB21 and PB31 Buttons (continued) Button Name Button Function Info Press to display a summary of network connection information and error conditions. Each setting in the summary information displays on the screen for five seconds.
  • Page 18: Understanding The Printer Language

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer There is only one LED on the printer: the Ready-to-Work™ indicator. Understanding the Ready-to-Work Indicator Indicator State Description One of several conditions: • The printer is in Standby mode.
  • Page 19: Changing The Printer Language

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer To selecting the printer language on first use Press the appropriate button to choose a language. • ESCP ZSIM Choosing the Printer Firmware The current firmware type and version display on the printer screen when the printer is in Ready mode.
  • Page 20 Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer To change the printer language using Fingerprint and a communications program 1 Connect your printer to your PC using a serial cable. For help, see “Connecting the Printer Through the Serial Port” on page 2 Start a communications program like HyperTerminal.
  • Page 21 Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer 3 Press to enter the Print Defs menu system. 4 Press until you reach CMD Language. 5 Press to enter the CMD Language menu system. 6 Press until you see the language of you want to select.
  • Page 22: Understanding The Printer Sounds

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer 7 Press and hold the Power button until the different command languages scroll automatically. 8 Press to select the printer language you want to select. The printer reboots automatically.
  • Page 23: Using The Batteries

    Standby mode. A fully charged battery can usually print over 300 6-inch labels (PB31) or 500 6-inch labels (PB21) at 25% print density. When the printer reports low battery, it can usually print over 50 6-inch labels at 10% print density.
  • Page 24: Installing The Battery

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Installing the Battery Make sure you fully charge the battery before you use your printer. You can charge the battery before or after you install them into the printer.
  • Page 25: Charging The Batteries

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Charging the Batteries There are two ways to charge the printer battery: • Connect AC power to the printer using a 12 VDC power supply and charge the battery while it is in the printer.
  • Page 26: Extending Battery Life

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Battery Icon Status (continued) Icon Status Battery is critically low. You need to replace the battery now. Battery charging error. You may need to replace the battery. External power connected and there is no battery in the printer.
  • Page 27: Loading Media

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Loading Media You can use roll or fanfold receipt media with the printer. The printer ships with a test page printed to verify that the printer works. To load media 1 Press the blue media cover release button until the cover releases.
  • Page 28 Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer 2 Insert a roll of media. Make sure you load the media clockwise so that it pulls off the core from the bottom of the printer. 3 Pull out 8 cm (3 in) of the media, then close the media cover.
  • Page 29: Using The Magnetic Stripe Reader

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Using the Magnetic Stripe Reader You can use the magnetic stripe reader to send information encoded on a credit card or driver’s license from your printer to your mobile computer.
  • Page 30: Using The Smart Card Reader

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Using the Smart Card Reader You can use the smart card reader to read cards embedded with a smart card chip. To use the smart card reader 1 Set up a wireless connection between your printer and your Intermec mobile computer.
  • Page 31 Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer 4 Insert the card into the smart card reader. smart card chip PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 32: Understanding The Display Modes

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Understanding the Display Modes The printer have six display modes to help you effectively interact with the printer: Ready, Information, Pause, Setup, Error, and Test. Use the following sections to understand the different printer modes.
  • Page 33: Understanding Pause Mode

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Understanding Pause Mode Use Pause mode to momentarily stop printing or to cancel a current print job. Once you pause the printer, the Pause mode screen appears. Use the Feed button to both pause and resume printing.
  • Page 34 Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer To enter or exit Setup mode Press the Setup button. • Once you enter Setup mode, there are two editing modes: normal and enhanced. Editing Settings in Setup Mode...
  • Page 35: Understanding Error Mode

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Understanding Error Mode The printer enters Error mode when it detects an error condition such as a low battery or a paper fault. Some error messages appear on the screen immediately when they occur, such as DOOR OPEN.
  • Page 36 Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer 3 Release both buttons. The printer performs a test feed (sensor calibration), prints, and then enters Dump mode. The printer is now in Dump mode and it scans the communication ports.
  • Page 37: Changing Configuration Settings From The Display

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer Options in Extended Test Mode Function Description Select Media This option is almost the same as the process in Test mode, except that the printer performs a slow test feed in Extended Test mode.
  • Page 38 Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer The Main Levels of the Setup Menu in Fingerprint The Main Levels of the Setup Menu in IPL ESC/P supports six types of setup commands: • Bluetooth - set Bluetooth parameters •...
  • Page 39: Printing A Test Page

    Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer • Query - retrieve information about the printer or a print request, cancel printing, or reset the printer • Wi-Fi - set Wi-FI parameters Printing a Test Page After you have loaded media in the printer, you are ready to print a test page.
  • Page 40 Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 41: Configuring The Pb21 And Pb31

    Configuring the PB21 and PB31 In this chapter you will find these sections: • Connecting the Printer to Your PC • Connecting the Printer to Your Network • Configuring the Printer Settings • Downloading Fonts and Graphics...
  • Page 42: Connecting The Printer To Your Pc

    Connecting the Printer Through the USB Interface To connect the printer to a PC through the USB device port, you need to install Intermec InterDriver® software. To make sure you have the latest version of InterDriver, you may want to go to the downloads page for the printer on www.intermec.com/support/downloads/...
  • Page 43: Connecting The Printer Through The Serial Port

    Chapter 2 — Configuring the PB21 and PB31 6 On the New Hardware Wizard screen, select Install from a list or specific location and then click Next to continue. Note: For LPT connections, you must restart your computer for Windows to detect the new hardware. For USB connections, the New Hardware Wizard will launch automatically when the printer is connected and turned on.
  • Page 44 Chapter 2 — Configuring the PB21 and PB31 3 Click File > Add printer. Or, in the General Tasks list, click Add printer. 4 Click Next. 5 Select Serial, then click Next. 6 Make sure that the COM Port is set to the correct serial port, and that Automatically detect communication parameters is selected.
  • Page 45: Connecting The Printer To Your Network

    SR61. You can create the bar code labels you need to connect the printer to a Bluetooth scanner using EasySet software. You can download a free version of EasySet from the Intermec web site at www.intermec.com. PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 46 3 Follow the procedure to discover and connect to Bluetooth devices in your mobile computer user’s manual. Note: For maximum security, you need to configure a Bluetooth passcode for the printer. The default passcode for the PB21 and PB31 is “1234.” To set up Bluetooth communications with a scanner 1 Download and install EasySet.
  • Page 47: Setting Up 802.11 Radio Communications

    Chapter 2 — Configuring the PB21 and PB31 Setting Up 802.11 Radio Communications The printer can have an internal 802.11 b/g radio to transfer and receive data using wireless communications. This manual assumes that you have already set up your wireless communications network including your access points.
  • Page 48 Chapter 2 — Configuring the PB21 and PB31 5 If your wireless access point uses DHCP, select Get TCP/IP parameters automatically. If the access point does not use DHCP, select Use the following TCP/IP parameters and type the device IP Address, Network Mask, Default Router (default gateway), and Name Server (primary DNS server).
  • Page 49 Chapter 2 — Configuring the PB21 and PB31 4 From the host PC, check the wireless settings. If you have an IPL version of the printer, send these commands to the printer: <STX><SI>wt,SSID<ETX> <STX><SI>wt,WEP1<ETX> <STX><SI>wt,WEP2<ETX> <STX><SI>wt,WEP3<ETX> <STX><SI>wt,WEP4<ETX> <STX><SI>wt,AUTH<ETX> <STX><SI>wt,WPA<ETX> <STX><SI>wt,WPA2<ETX>...
  • Page 50: Configuring Wireless Printing Using Ipl

    Chapter 2 — Configuring the PB21 and PB31 Understanding the 801.11 Radio Icons Icon Description Weak signal Poor signal No signal Use the following sections to set most of your wireless communication settings. For help with additional commands and information, see either the Intermec Fingerprint Developer's Guide IPL Developer’s...
  • Page 51 Chapter 2 — Configuring the PB21 and PB31 To configure the printer to use WPA-PSK or WPA2-PSK mode 1 Send the following commands to login as an admin and set the SSID: <STX><ESC>.x,su -p pass admin<ETX> <STX><SI>ws,SSID,xxxxx<ETX> where xxxxx can be from 0 to 32 alphanumeric characters.
  • Page 52: Configuring Wireless Printing Using Fingerprint

    Chapter 2 — Configuring the PB21 and PB31 where xxxx is the unique username and the unique password for this protocol. 4 If you are using TTLS, you may need to send this command to set the TTLS outer name: <STX><SI>ws,TTLS_USER, xxxx <ETX>...
  • Page 53 Chapter 2 — Configuring the PB21 and PB31 To configure the printer to use WEP authentication 1 Send the following commands to login as an admin and set the SSID: run"su -p pass admin" setup write "wlan","uart1:" setup "wlan","SSID","xxxxx" where xxxxx can be from 0 to 32 alphanumeric characters.
  • Page 54 Chapter 2 — Configuring the PB21 and PB31 run"su-p pass admin" setup write "wlan","uart1:" setup "wlan","SSID","xxxxx" where xxxxx can be from 0 to 32 alphanumeric characters. 2 Send one of the following WPA/WPA2 ON commands to set up WPA-802.1x or WPA2-802.1x authentication. You should also send the WPA_PSK command that does not contain a value: setup "wlan","WPA","ON"...
  • Page 55: Configuring The Printer Settings

    Changing Wi-Fi Configuration Settings From PrintSet PrintSet is a printer configuration tool that you can download from the Intermec web site. PrintSet can communicate with your printer through a serial cable or a network connection. It works on all PCs running Windows 98 (or later).
  • Page 56: Changing Configuration Settings From The Printer Home Page

    Chapter 2 — Configuring the PB21 and PB31 If your printer uses the Fingerprint language, you use the SETUP command, followed by the node, subnode, and parameters setting. Fingerprint automatically sends feedback to the communications program as you type. If you want to see what you are typing with IPL, you need to complete the following procedure.
  • Page 57: Changing Configuration Settings Using Smartsystems Foundation

    You can use the SmartSystems console to change configuration settings on your printer. The printer ships with the SmartSystems client loaded on it. The console is part of SmartSystems Foundation and is available from the Intermec web site. To download SmartSystems Foundation, go to www.intermec.com/products/ smrtsysfoundation/index.aspx.
  • Page 58: Upgrading The Printer Firmware Using Printset

    Chapter 2 — Configuring the PB21 and PB31 Upgrading the Printer Firmware Using PrintSet You can only upgrade your printer using PrintSet when the printer is running IPL, Fingerprint, or ESC/P printer languages. To upgrade the printer using PrintSet, you need to install PrintSet on your PC and purchase a serial cable (P/N 075497).
  • Page 59 Chapter 2 — Configuring the PB21 and PB31 4 Open PrintSet. The Intermec PrintSet dialog box appears. 5 Under My Printers, click the printer whose firmware you want to upgrade. 6 Under Printer Tasks in the right-hand column, click Firmware Wizard.
  • Page 60: Upgrading The Printer Firmware Using The Printer Home Page

    Chapter 2 — Configuring the PB21 and PB31 Upgrading the Printer Firmware Using the Printer Home Page You can upgrade your printer using the printer home page with a printer with an 802.11 radio running IPL or Fingerprint. To upgrade using the printer home page 1 Establish a connection between your printer and the network.
  • Page 61 Chapter 2 — Configuring the PB21 and PB31 6 In the address field type the IP address of your printer and press Enter. The home page of the printer appears. PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 62: Upgrading Printer Firmware Using Smartsystems Foundation

    Chapter 2 — Configuring the PB21 and PB31 7 Click Maintenance. The Maintenance page appears. 8 When prompted, enter your user name and password. 9 Browse to the (.bin) file you want to upgrade to and select it. 10 Click Upgrade.
  • Page 63: Upgrading The Printer Firmware Using A Communications Program

    Chapter 2 — Configuring the PB21 and PB31 Upgrading the Printer Firmware Using a Communications Program You can upgrade your printer firmware using a communications program like HyperTerminal and a printer running either the IPL, Fingerprint or ESC/P printer language. Using a communications program is not the preferred method for upgrading printer firmware.
  • Page 64 Chapter 2 — Configuring the PB21 and PB31 6 Type : su -p pass admin. 7 Type : dlk -z The printer’s display will read “Upgrading”. 8 In the communications program window, click Transfer > Send File. A dialog box will appear.
  • Page 65 Chapter 2 — Configuring the PB21 and PB31 5 Type: run “dlk -z” The printer’s display will read “Upgrading”. 6 In the communications program window, click Transfer > Send File. A dialog box will appear. 7 In the protocol drop-down box, choose Zmodem.
  • Page 66: Downloading Fonts And Graphics

    Chapter 2 — Configuring the PB21 and PB31 su -pass admin. 7 Type dlk -z. The printer’s display will read “Upgrading”. 8 In the communications program window, click Transfer > Send File. A dialog box will appear. 9 In the protocol drop-down box, choose Zmodem.
  • Page 67: Troubleshooting And Maintaining The Pb21 And Pb31

    Troubleshooting and Maintaining the PB21 and PB31 Use this chapter to solve problems you may encounter while using the PB21 and PB31. This chapter contains the following sections. • Troubleshooting the Printer • Resetting the Printer • Cleaning the Printer...
  • Page 68: Troubleshooting The Printer

    58. If you cannot find the answer to your problem, you may need to contact Product Support. Contacting Product Support Before you call Intermec Product Support, you may want to visit the Intermec technical knowledge base (Knowledge Central) at intermec.custhelp.com to review technical information or to request technical support.
  • Page 69 Chapter 3 — Troubleshooting and Maintaining the PB21 and PB31 Possible Printer Error Icons and Messages Error Icon Error Message Description Pause The print job is paused. Paper out (IPL) The printer is out of paper. Load a new roll of media.
  • Page 70: Troubleshooting Printer Problems And Finding Solutions

    Chapter 3 — Troubleshooting and Maintaining the PB21 and PB31 Possible Printer Error Icons and Messages (continued) Error Icon Error Message Description Door open The printer is not completely closed. Press down on the media cover to make sure it is latched.
  • Page 71 Chapter 3 — Troubleshooting and Maintaining the PB21 and PB31 Printer Problems and Solutions (continued) Problem Possible Solution • The printer is not Re-establish a Bluetooth connection with the printing with a mobile computer or scanner. For help, see your Bluetooth connection.
  • Page 72: Troubleshooting Communication Problems

    Chapter 3 — Troubleshooting and Maintaining the PB21 and PB31 Printer Problems and Solutions (continued) Problem Possible Solution • Print quality it poor. Clean the printhead. For help, see “Upgrading the Firmware” on page • Check the battery and recharge or replace as necessary.
  • Page 73: Using Dump Mode In Ipl

    Chapter 3 — Troubleshooting and Maintaining the PB21 and PB31 As long as a continuous string of characters is being received, the program wraps the lines until the label is full and then starts to print another label. After each character transmission, the following information prints: •...
  • Page 74: Resetting The Printer

    Chapter 3 — Troubleshooting and Maintaining the PB21 and PB31 Resetting the Printer You rarely need to reset the printer, unless you are upgrading the firmware. If your printer occasionally locks up, you will want to reset it. A reset reinitializes the 802.11 radio and clears the working memory.
  • Page 75: Cleaning The Printer

    Tear bar Paper sensor Platen roller Printhead PB21 and PB31 Mobile Receipt Printer: Identifying the parts of the printer to clean regularly PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 76: Cleaning The Printhead

    Chapter 3 — Troubleshooting and Maintaining the PB21 and PB31 Cleaning the Printhead Clean the printhead every five rolls of media to prolong the life of the printhead and ensures that you maintain high print quality. Clean the printhead with the Intermec cleaning swab (P/N AE26034).
  • Page 77: Cleaning The Printer Exterior

    Chapter 3 — Troubleshooting and Maintaining the PB21 and PB31 Be sure to clean the following parts using the cleaning swab: • Paper sensors • Tear bar Cleaning the Printer Exterior Make sure to keep the exterior of the printer clean, this will reduce the risk of dust or foreign particles reaching the inside of the printer and affect printer functionality.
  • Page 78 Chapter 3 — Troubleshooting and Maintaining the PB21 and PB31 PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 79: Specifications

    Specifications...
  • Page 80: Specifications

    Charging temperature: 0°C to 45°C (32°F to 113°F) Relative humidity: 10 to 90% non-condensing Sealing: IP54 is used. Paper path and card reader slots are excluded from IP54. Memory RAM: 16 MB PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 81 • Notch: Tag media • Black mark: Tag, and fanfold media Here are a few things to keep in mind when ordering media for the printer: PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 82 Use the following table as a guide when setting sensitivity numbers. Recommended Media Sensitivity and Constant Sensitivity Constant Description North America Receipt Media Duratherm TC Duratherm NTC - 2 Duratherm NTC Duratherm Receipt - Fanfold Duratherm Linerless PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 83: Interfaces

    Description HHC RXD Receive data from host (input) HHC CTS Clear to send from printer (output) HHC RTS Request to send from host (input) HHC TXD Transmit data to printer (output) Ground PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 84: Usb Interface

    Ring indicator USB Interface To use the USB interface to print from a PC, you need to have the Intermec InterDriver printer driver installed on your PC. For help setting up USB communications, see “Connecting the Printer Through the USB Interface” on page...
  • Page 85: Accessories

    With the handstrap attached, you can also attach the shoulder strap. Intermec Cleaning Swab Use the Intermec cleaning swab to clean the printhead and platen roller. One cleaning swab is included in the box with the printer. You can also purchase the cleaning swab from www.intermec.com.
  • Page 86 The wide padded strap makes it comfortable to wear the printer for long periods of time Serial Cable The serial adapter is an 8-pin DIN to DB9 connector that connects from the printer to your desktop PC. PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 87: Default Settings

    Default Settings...
  • Page 88: Factory Default Settings (Fingerprint Printers)

    Feed adjust Start adjust Stop adjust Power Low battery indicator 7.4 V Sleep timer 20 sec Standby timer 30 min Bluetooth Discoverable Enable Connectable Enable Encryption Disable Authentication Disable Reserve printer Disable PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 89 Appendix B — Default Settings Factory Default Settings for Fingerprint Printers (continued) Setting Default Value Device name 1-16 characters Passcode 1234 PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 90: Factory Default Settings (Ipl Printers)

    Standby timer 30 min Ser-Com Baud rate 115200 Data bits Parity None Stop bits Protocol XON/XOFF Network IP selection DHCP and BOOTP IP address 0.0.0.0 Netmask 0.0.0.0 Default router 0.0.0.0 Name server 0.0.0.0 PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 91: Factory Default Settings (Esc/P Printers)

    7.4 V Sleep timer 20 sec Standby timer 30 min Bluetooth Discoverable Enable Connectable Enable Encryption Disable Authentication Disable Reserve printer Disable Device name 1-16 characters Passcode 1234 Serial-Com Baud rate 115200 PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 92 Setting Default Value Data bits Parity None Stop bits Protocol XON/XOFF # Network IP selection DHCP and BOOTP IP address 0.0.0.0 Netmask 0.0.0.0 Default router 0.0.0.0 Name server 0.0.0.0 MAC address Unique PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 93: Ipl And Fingerprint Setup Menus

    IPL and Fingerprint Setup Menus...
  • Page 94: Ipl Setup Menu

    FORMAT ROUTER DOTS PROTOCOL NAME SERVER PAGE SENSITIVITY MAC ADDRESS DARKNESS FONT LBL REST POINT FORM ADJ DOTS DATA DUMP FORM ADJ DOTS MEMORY RESET LSS TEST ADVANCED THERMAL MGMT MIN SPEED PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 95: Fingerprint Setup Menu

    CLIP DEFAULT XON/XOFF CONTRAST DATA TO HOST TESTFEED LTS VALUE DATA FROM TESTFEED MODE LTS ADJUST HOST LEN (SLOW NEW LINE LTS TEST MODE) REC BUF ADVANCED THERMAL MGMT TRANS BUF MIN SPEED PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 96 Appendix C — IPL and Fingerprint Setup Menus PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 97: Index

    Index Numerics 802.11 radio icons, understanding setting up communications AB27 battery AC18 battery charger accessories AB27 battery AC18 battery charger AV14 vehicle dock belt clip cart mount handstrap power supply serial cable shoulder strap AV14 vehicle dock backlight, understanding batteries AC18 charger charging charging time...
  • Page 98 WPA-PSK/WPA2-PSK door open authentication,configurin field out of label g to use IP configuration error IP link error LSS too high/low language, see printer language out of paper PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 99 Fingerprint Fingerprint change using IPL change using PrintSet PrintSet upgrading firmware change printer language using HyperTerminal changing configuration settings using Printer Home Page using PrintSet downloading fonts and graphics PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 100 Index connecting to the printer configuring with Fingerprint configuring with IPL WPA-PSK/WPA2-PSK WEP authentication authentication configuring with Fingerprint configuring with Fingerprint configuring with IPL configuring with IPL WPA/WPA2 authentication PB21 and PB31 Mobile Receipt Printer User’s Guide...
  • Page 102 Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2011 Intermec Technologies Corporation. All rights reserved. PB21 and PB31 Mobile Receipt Printer User’s Guide *934-051-003* P/N 934-051-003...

This manual is also suitable for:

Pb31

Table of Contents