Understanding The Printer Sounds - Intermec PW50 User Manual

Chapter 1 — Using the PW50 Workboard Printer

Understanding the Printer Sounds

6
Understanding the Intermec Ready-to-Work Indicator
State Description
Off The PW50 is in Standby mode.
On The PW50 is powered on and operating.
Blinking A blinking light can mean one of several conditions:
•
The printer is out of paper.
•
The media cover is open.
•
There is a printer error that requires you to perform an action.
For a list of possible problems, see Chapter 3,
"Troubleshooting and Maintaining the PW50."
The PW50 plays sounds in response to several actions that you can
take with the printer. Use the following table to understand when the
sounds occur and what they mean.
Understanding the Printer Sounds
Sound Occurs When:
•
Power You insert a battery in the printer.
•
The PW50 starts charging the battery.
•
You plug in the AC adapter.
Hardware You open the media door, close the media door, or insert a cable.
Button You press one of the PW50 buttons.
•
Error The printer cannot feed paper or print a job because of a
hardware issue such as the media door open, a paper jam, or
there is no media.
•
An error occurs such as a paper jam, a print error, or the
printer is out of range.
PW50 Workboard Printer User's Guide