Intermec PB22 User Manual page 59

PB22/PB32 Mobile Label and Receipt Printer User's Guid
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32
Cleaning the PB22/PB32 Printer (continued)
Printer Part
Paper sensors
Printhead
Tear bar
Exterior
Interior
Cleaning Method
Clean thoroughly with 70%
isopropyl alcohol and a
cotton swab.
Use 70% isopropyl alcohol
on a cotton swab to lean the
print elements from end to
end.
Clean thoroughly with 70%
isopropyl alcohol and a
cotton swab
Clean with a water-
dampened cloth.
Brush or air blow. Make sure
the paper sensors are free of
dust.
Cleaning Interval
After every five rolls of
media or more often if
necessary.
After every five rolls of
media or more often if
necessary.
As needed.
As needed.
After every five rolls of
media or more often if
necessary.
51