Changing Configuration Settings From The Printer Home Page - Intermec PB22 User Manual

Chapter 2 — Configuring the PB22/PB32
26
If your printer uses the Fingerprint language, you use the SETUP
command, followed by the node, subnode, and parameters setting.
Here is a Fingerprint example that sets your media setting to labels
with gaps:
SETUP "MEDIA,MEDIA TYPE,LABEL (w GAPS)"
If your printer uses the IPL language, you would send this command:
<STX><SI>T1<ETX>
Fingerprint automatically sends feedback to HyperTerminal as you
type. If you want to see what you are typing with IPL, you need to
complete the following procedure.
To see IPL commands as you type
1 From the HyperTerminal menu, select File > Properties > the
Settings tab.
2 Click the ASCII Setup button.
3 Select Echo typed characters locally.
4 Click OK twice.
Changing Configuration Settings From the Printer
Home Page
If you have an 802.11 radio in your printer and it is connected to the
network, you can use your web browser to open the printer home page
and make configuration changes. To connect to a wireless network,
follow the procedure in
Communications" on page
To make changes to the configuration
• From the home page, click Configuration.
For more information on how to change configuration settings, see
the Fingerprint Programmer's Reference Manual (P/N 937-005-xxx), the
IPL Programmer's Reference Manual (P/N 937-007-xxx), or the ESC/P
Programmer's Reference Manual (P/N 937-010-xxx). You can download
these documents from the Intermec web site at www.intermec.com.
PB22/PB32 Mobile Label and Receipt Printer User's Guide
"Setting Up 802.11 Radio
30.