Extending Battery Life - Intermec PB22 User Manual

Chapter 1 — Using the PB22/PB32 Mobile Label and Receipt Printer

Extending Battery Life

10
Battery Icon Status (continued)
Icon Status
Battery is low. Recharge the battery.
Battery is critically low. You need to replace the battery now.
Battery charging error. You may need to replace the battery.
External power connected and there is no battery in the printer.
Here are some tips for extending the overall life of your battery:
• Never expose the battery to direct sunlight or temperatures over
50°C (122°F).
• Only charge the battery inside the PB22/PB32 using a power
supply or in the 4-bay battery charger (Model AC18).
• Do not set the backlight to always on. The always on setting
disabled automatic power saving modes.
Here are some tips for extending the life of your battery between
charges:
• Press the Standby button to put the printer in Standby mode.
• Remove the battery from the printer if you will not be using it for
three days or more.
• Do not operate the PB22/PB32 in extremely cold temperatures,
the allowable operating cold temperature is -20°C (-4°F). Using
the PB22/PB32 in temperatures below freezing reduces the overall
battery life.
Remember that any rechargeable battery loses its ability to maintain a
charge over time. You can only recharge it a finite number of times
before you must replace it.
PB22/PB32 Mobile Label and Receipt Printer User's Guide