Interface Boards - Intermec EasyCoder F4 Installation & Operation Manual

Interface Boards

Intermec EasyCoder F4 – Installation & Operation Ed. 3
A number of different interface boards are available for use with the
EasyCoder F4. The interface boards are either factory-fi tted or can
easily be fi tted by an authorized service technician.
The EasyCoder F4 can accommodate one interface board.
The interface boards for the EasyCoder F4 are:
• Parallel Interface Board (IEEE 1284)
• Double Serial Interface Board
• Industrial Interface Board
• EasyLAN 100i Interface Board (Ethernet)
Refer to Appendix 3 "Interfaces" for more information on interface
boards.
Chapter 10 Options
81