Packet Filters - Ovislink Wireless Router User Manual

DMZ WAN IP Address
UNDO
ADD
DMZ List
DELETE ALL
DELETE

Packet Filters

In the Packet Filters setup screen, you can block specific internal users from accessing
the Internet and you can also disable specific Internet services. You can set up the filters
through the following three filter. Each filter can be set to filter (drop) or forward
(pass) packets. You can input up to 24 filters in this device.
Network Adapter Address Filter
Filter/Forward
Adapter Address
UNDO
ADD
IP Address Filter
Filter/Forward
Single/Range
IP Range
Direction
UNDO
ADD
TCP/UDP Port Filter: Filter using the port number. You can set filter for a single port
or a range of ports.
OvisLink
computer.
Enter the WAN IP Address set for DMZ Host.
Click to clear all the settings on this page.
After completing the settings on this page, click
"ADD" to save the settings.
Display all the DMZ hosts.
Click to delete all the DMZ host(s) on the list.
Click on the Index drop-down menu to select the
desired host number and then click DELETE to delete
only the selected host.
Click the radio button to filter or forward the computer
according to local computer's network adapter MAC address
you enter in the next field.
Enter the MAC address of the computer that you want to
filter/forward.
Click to clear all the settings on this page.
After completing the settings on this page, click "ADD" to
save the settings.
Click the radio button to filter or forward the computer
according to local comp uter's IP address you enter in the next
field.
You can filter a single IP, or a range of the IP addresses.
Enter the Start and End IP addresses for a range of IP addresses
for filter/forward.
?From Local IP: filtering IP address of a local computer; or
?To Remote IP filtering IP address of a remote server (this
remote server connects to the device via Internet).
Click to clear all the settings on this page.
After completing the settings on this page, click " ADD" to
save the settings.
- 19