Virtual Server - Ovislink Wireless Router User Manual

3. Enter the second management station's network adapter MAC address. If you are
only setting up one management station, leave Station 2 MAC address with all F.
Block WAN Request:
?
1. Click to enable this function.
Modify the configuration port: Check to enable the function, otherwise the default
configuration port is set at 80.

Virtual Server

In this page, you can set up a local server with specific port number that stands for the
service (e.g. web (80), FTP (21), Telnet (23)). When this device receives an incoming
access request for this specific port, it will be forwarded to the corresponding internal
server. You can add virtual servers by either port numbers or by names.
Maximum 24 Server entries are allowed and each port number can only be assigned to
one IP address.
NOTE: Setting up Virtual Server is like opening the firewall, which exposes your
network to users on the Internet. This means the device's NAT will no longer be able
to provide protection from hackers.
OvisLink
- 17