Static Mode - Ovislink Wireless Router User Manual

Username
Password
Service Name
Max packet size
(TCP MSS)
Static IP Address
Static DNS Server
Auto-disconnect
?
idle for minutes
?Auto-reconnect
UNDO
SAVE

Static Mode

For leased line users, information provided by their ISPs has to be filled in the below
respective fields when this mode is selected. Information from your ISP includes: IP
address, Subnet Mask, Gateway, primary DNS, secondary DNS. Note that there may be
more than one IP address from your ISP, select one address and enter it in the
corresponding field.
the "Global Port" to refresh the screen.
• Maximum input is 52 alphanumeric characters (case
sensitive).
• Maximum input is 36 alphanumeric characters (case
sensitive).
For identification purpose. If it is required, your ISP will
provide you with the information.
Click the down arrow ? to select the most appropriate MSS
(ma ximum segment size; default value is 1452) for your
application. Reducing the packet size can help connecting to
certain web sites or speeding up packet transfer rate. If the
incorrect selection is selected, you may not be able to open
certain web sites.
Enter the IP address provided by your ISP.
Enter the primary and secondary DNS addresses provided by
your ISP.
if
Configure this device to disconnect the PPPoE connection
when there is no activity for a predetermined period of time.
? Default: 5 minutes. You can input any nu mber from 0 to
65535.
? To keep the line always connected, set the number to 0.
Check to enable auto-reconnected with PPPoE line. This
function allows the device to automatically reconnect when the
line is disconnected due to ISP problem.
Click UNDO to clear all the settings on this page.
After completing the settings on this page, click SAVE
to save the settings.
OvisLink
- 10