Advertisement
Quick Links
How to establish the VPN between two RS
Note: Here, we use the RS-1200 for the example, it can also used on
the RS-2500 and RS-3000.
Site A RS-1200 Configuration:
1. Configure VPN
Remote Gateway: indicate the other side VPN router's IP address
or domain name
Preshared Key: user can define the key by himself, the key uses to
identify the exchanged data for VPN
Encryption: support DES, 3DES, AES-128, AES-192, and AES-256,
AES-256 provides more secure encrypted type but less performance.
Authentication: support MD5 and SHA-1
Both sides Preshared Key, Encryption and Authentication
setting must be the same, or VPN tunnel cannot be built up.
Series
IPSec Autokey as following example:
1
Advertisement
Related Manuals for Ovislink AirLive RS Series
Summary of Contents for Ovislink AirLive RS Series
- Page 1 How to establish the VPN between two RS Series Note: Here, we use the RS-1200 for the example, it can also used on the RS-2500 and RS-3000. Site A RS-1200 Configuration: 1. Configure VPN IPSec Autokey as following example: Remote Gateway: indicate the other side VPN router’s IP address or domain name Preshared Key: user can define the key by himself, the key uses to identify the exchanged data for VPN...
- Page 2 How to establish the VPN between two RS Series ISAKMP Life Time, IPSec Life Time: both settings are related to the life time of VPN tunnel, if you do not know how to configure it, just leave the setting as default. 2.
- Page 3 How to establish the VPN between two RS Series Keep alive IP: it uses to trigger the connection of VPN tunnel in order to keep VPN tunnel working. It is usually to configure the Keep alive IP with the other VPN side router’s LAN IP address. Show remote Network Neighborhood: allow NetBIOS protocol to pass through VPN tunnel 3.
- Page 4 How to establish the VPN between two RS Series Site B RS-1200 Configuration: 1. Configure VPN IPSec Autokey as following example:...
- Page 5 How to establish the VPN between two RS Series 2. Configure Tunnel to define further IPSec rule. (In RS-1200, the item name is Trunk)
- Page 6 How to establish the VPN between two RS Series 3. Enable IPSec VPN in Outgoing and Incoming Policy...
- Page 7 How to establish the VPN between two RS Series 4. Finish both site of VPN setting. Verify the VPN connection From Site A PC 192.168.1.2 1. Try to ping Site B LAN IP 192.168.100.1 and the IP address 192.168.100.2 of PC2, both ping results are fine.
- Page 8 How to establish the VPN between two RS Series 2. PC1 also can connect to PC2 directly using IP 192.168.100.2, and send file to PC2.
- Page 9 How to establish the VPN between two RS Series From Site B PC 192.168.100.2 1. Try to ping Site A LAN IP 192.168.1.1 and the IP address 192.168.1.2 of PC1, both ping results are fine.
- Page 10 How to establish the VPN between two RS Series 2. PC2 also can connect to PC1 directly using IP 192.168.1.2, and send file to PC1...
- Page 11 How to establish the VPN between two RS Series 3. So, we know the IPSec connection is working well.