Source Control Screen - Kenwood DNX9280BT Instruction Manual

Source Control Screen

Switches to source control screen to use various
functions.
1 Display the Source Control Screen
See <How to Display the Source Control Screen>
(page 17).
2 Operation on the Source Control Screen
1
3
[BAND]*
1 Switches to TV1 or TV2.
[4], [¢] Select a channel.
Use the [SEEK] to change the channel tuning
sequence.
2 Display the TV Preset List Screen. See
Select> (page 43).
3 Switches to the TV screen.
1 Information display
Channel information display
"TV" Band display
"Group" TV Area Group Display. See
Setup> (page 83).
"Preset" Memory Number Display
"ch" Channel display
Multi Function
[1/2] Switches the multi function display.
[ ] Closes the multi function bar.
[P1] – [P6]*
1 When [P1] to [P6] buttons appear,
you can recall channels on memory.
For memory of broadcasting stations, see
Memory> (page 42)
43).
2
<Preset
<TV
<Auto
or <Manual Memory> (page
[SEEK]*
1 Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[AME]*
1 Selects the Auto Memory mode.
See <Auto Memory> (page
⁄
• * Analog TV only.
1
42).
Next page 3
41
English