Source Control Screen Description; List Screen - Kenwood DNR1008RVS Instruction Manual

Basic Operations
Source control screen
description
There are some functions which can be
performed from most screens.
7
1 2
1
Displays the source selection screen. (P.14)
2
Displays the SETUP Menu screen. (P.68)
Short-cut source icons
3
The source changes to the one you have set
with a short-cut. For the short-cut setting, refer
to Customize Short-cut source icons on HOME
screen (P.15).
Function panel *
4
Touch the right side of the screen to display the
function panel. Touch again to close the panel.
5
Connected Bluetooth device information.
Indicator items
6
Displays the current source condition and so on.
• [ATT]: The attenuator is active.
• [DUAL]: The dual zone function is active.
• [MUTE]: The mute function is active.
• [LOUD]: The loudness control function is active.
Content list *
7
Displays the track/file/station/channel list.
Operation keys
8
You can operate the current source with these
operation keys. The available functions are
different depending on the source type.
16
6 5
8 4
3
* For right hand drive vehicles, the left and right
drawers are swapped. For how to set up the
driving position, see User Interface Setup
(P.72).

List screen

There are some common function keys in the
list screens of most sources.
For the operation by source, refer to
(P.31, 35, 56).
Display the list screen
For USB/SD/iPod:
1
Touch [1] or the item listed on the
information area in the source control
screen.
h The list screen appears. h
For Bluetooth audio:
1
Touch [1].
h The list screen appears. h
You can use following operation keys from this
screen.
1
3
1
Displays the list type selection window.
2
Displays a music/movie file list.
2 6
4 5