Related Manuals for Kenwood DDX8026BT
Summary of Contents for Kenwood DDX8026BT
- Page 1 GPS NAVIGATION SYSTEM DNX SERIES DNX9260BT DNX7260BT MONITOR WITH DVD RECEIVER DDX SERIES DDX8026BT INSTRUCTION MANUAL © B64-4676-10/02 (EW)
-
Page 2: Table Of Contents
Contents Before Use Notes How to read this manual Initial Setup Functions of the buttons on the front panel Basic Operation How to Display Top Menu Screen Customization of Top Menu Screen How to play media Detaching the monitor panel Attaching the monitor panel How to Display the Source Control Screen 18 Operation on the Playback Screen of Visual... - Page 3 Hands Free Unit Control Setup Menu Before Use How to Display SETUP Menu Screen Downloading the Phonebook DivX Setup Receiving a Call Software Information During a Call User Interface Call Waiting Language Setting Making a Call Touch Panel Adjustment Calling by Phonebook Clock and Date Setup Calling by Entering a Phone Number Security Setup...
-
Page 4: Before Use
If the unit still does not operate normally after a while, • Remove the USB device before pressing consult your Kenwood dealer. the Reset button. Pressing the Reset button with the USB device installed can damage the data contained in the USB device. -
Page 5: Notes
Kenwood dealer. layer) • When you purchase optional accessories, DVD-RAM × check with your Kenwood dealer to make ‡ CD-TEXT/8-cm (3 inch) Music CD sure that they work with your model and in discs supported. your area. - Page 6 CD signals.) ¡P An online manual about audio files is put About Audio files on the site, www.kenwood.com/cs/ce/ • Playable Audio file audiofile/. On this online manual, detailed AAC-LC (.m4a) information and notes which are not MP3 (.mp3)
- Page 7 See <About Audio files>. • When the iPod is connected to this unit, "KENWOOD" or "✓" is displayed on the iPod iPod/iPhone that can be connected to indicate that you cannot operate the to this unit iPod.
- Page 8 For the latest information on connectable depending on its type. navigation units, access www.kenwood. • HFP is a profile used to make a hands-free com/cs/ce/. call. • OPP is a profile used to transfer data such as TV tuner that can be connected to a phone book between units.
-
Page 9: Region Codes In The World
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. DVD disc marks Operation regulatory marks With this DVD, some functions of this unit Symbol Description such as the play function may be restricted... -
Page 10: How To Read This Manual
How to read this manual This manual uses illustrations to explain its operations. Source Control Screen Source Control Screen The displays and panels shown in this Switches to the source control screen to manual are examples used to provide use various playback functions. clear explanations of the operations. - Page 11 About the model groups Drag or Flick operation If different functions are used in Press the button, denoted by different model groups, the model It indicates that you scroll icons or groups are described as shown below. list items left and right by flicking or Names of series included in each dragging them and touch to select the model group are as follows:...
-
Page 12: Functions Of The Buttons On The Front Panel
Functions of the buttons on the front panel For DDX series Reset button (page 4) Remote control sensor 1 sec. : Press for longer than 1 second Attenuation of the volume On/Off. 1 sec. Switches the source that is output at the AV OUTPUT terminal. Volume adjustment. -
Page 13: Detaching The Front Panel
Functions of the buttons on the front panel Turns the power On. * Displays the Source Control screen. (page 18) In case of visual sources, the playback screen is first displayed and changed to the source control screen by pressing the button again. 1 sec. -
Page 14: Basic Operation
Basic Operation How to Display Top Menu Screen How to Display Top Menu Screen Top Menu Screen is the entrance to all the functions. You can select sources and various setup menus from this screen. Top Menu screen Touch the [MENU] button on any screen. The Top Menu Screen appears. -
Page 15: Customization Of Top Menu Screen
Basic Operation Displays Tools screen of ] Closes the function bar. navigation. Displays Where To ? screen of navigation. Customization of Top Menu Screen Customization of Top Menu Screen ] Switches to the navigation screen. Up to 3 sources or setups frequently used ] Switches to the Hands Free Main on the Top Menu screen can be registered. -
Page 16: How To Play Media
Basic Operation 7 SD card How to play media How to play media For DNX series: 7 Disc media Update the navigation software. For DDX series: Audio File Listening & Video File/ Picture File Watching Press the [0] button to open/close the front panel. -
Page 17: Detaching The Monitor Panel
Basic Operation • It closes automatically when no operation is Detaching the monitor panel Detaching the monitor panel done for about a minute. Open the front panel Put the monitor panel in the protective bag 1 sec. Press the [0] button for longer than 1 Attaching the monitor panel Attaching the monitor panel second to open the front panel before... -
Page 18: How To Display The Source Control Screen
Basic Operation How to Display the Source Control How to Display the Source Control While watching the navigation screen with secondary window Screen Screen On the Source Control screen you can find all the control buttons for the selected source. Source Control Screen •... -
Page 19: Operation On The Playback Screen Of Visual Sources
Basic Operation Operation on the Playback Screen Operation on the Playback Screen of Visual Sources of Visual Sources The Playback screen of a visual source appears. While watching visual sources, basic operation is possible by touching the screen. While watching the Source Control The screen has 4 function areas. -
Page 20: How To Display The Navigation Screen
Basic Operation How to Display the Navigation How to Display the Navigation Picture in Picture function Picture in Picture function Screen Screen Two screens, the navigation screen and source screen, are displayed. When Picture DNX series DNX series in Picture function is on, touching the source screen switches between the camera image and source image. -
Page 21: Secondary Window Function
Basic Operation Navigation screen with Easy Secondary window function Secondary window function Control window You can control audio sources while the navigation screen is displayed, and view the navigation information while the source control screen is displayed. 1 sec. Pressing the button for longer than 1 Navigation screen with Split Screen second while the source control screen is displayed switches the secondary window... -
Page 22: Watching Dvd/Video Cd
Watching DVD/Video CD You can play DVD/Video CD using various functions. • Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller mode switch> (page 96). Playback Screen Playback Screen Easy Control Screen Easy Control Screen Basic functions are available even when Displays the basic operation buttons on the playback screen is displayed. -
Page 23: Source Control Screen
[4], [¢] Source Control Screen Source Control Screen Searches for a chapter. DVD-VIDEO DVD-VIDEO Switches to the source control screen to Selects a scene (when PBC is Video CD Video CD use various playback functions. On) or a track (when PBC is Off ). -
Page 24: Dvd-Video Disc Menu
Watching DVD/VCD Video CD Video CD [2], [3], [5], [∞] Selects a menu option. [REP] Switches the Repeat Play operations in the following sequence. [Enter] Enters your menu selection. Track Repeat, Repeat Off (Available [Return] Returns to the previous menu when the PBC is off ) screen. -
Page 25: Video Cd Zoom Control
[Previous] Displays the Menu Control Video CD Zoom Control Video CD Zoom Control 1 screen. Displays an enlarged VCD screen. [Angle] Switches the picture angle. Display the playback screen [SUB] Switches the subtitle language. See <Operation on the Playback Screen [Audio] Switches the voice language. -
Page 26: Music Cd/ Audio File Listening & Video File/ Picture File Watching
Music CD/ Audio File Listening & Video File/ Picture File Watching You can recall various control screens during playback of CD, audio file, video file and picture file. • See <List of playable discs> (page 5) for playable discs. • See <About Audio files> (page 6), <About Video files> (page 6) or <About Picture files> (page 7) for playable files. - Page 27 "3" Play Mode Display [INFO] Displays music information of "P"/ "R" Play Time Display CD-TEXT being played. Use the [TIME] to change play time Audio File Audio File Au Au Au Au MPEG/DivX® MPEG/DivX® JPEG JPEG display. [4Line]/ [2Line] Switches the number ] When appears, the text display of lines displayed in the Information...
-
Page 28: List Search
Music CD/ Audio File Listening & Video File/ Picture File Watching 1 Folder opens when touched, and the List Search List Search files in the folder are played. Folder list: Searches folders and Audio/ Selects the file type to USB/SD USB/SD Video/ Picture files stored in media and display. -
Page 29: Album Artwork (Usb/Sd)
USB/SD USB/SD Thumbnail Viewer Album artwork (USB/SD) Album artwork (USB/SD) Searches for songs in an album artwork in USB/SD. Display the Source Control Screen See <Source Control Screen> (page 26). Display the artwork Screen 1 Touching a thumbnail image displays it in full-screen view. -
Page 30: Link Search (Audio File In Usb/Sd)
Music CD/ Audio File Listening & Video File/ Picture File Watching Link search (Audio File in USB/SD) Link search (Audio File in USB/SD) Playback Screen Playback Screen (Video file, Picture file) (Video file, Picture file) Searches for another song of the currently selected artist. -
Page 31: Easy Control Screen (Video File, Picture File)
Easy Control Screen Easy Control Screen Picture Control (USB/SD) Picture Control (USB/SD) (Video file, Picture file) (Video file, Picture file) Adjusting the picture display. Displays the basic operation buttons on Display the Playback Screen the screen. See <Operation on the Playback Screen Display the Easy Control Screen of Visual Sources>... -
Page 32: Movie Menu Control (Disc)
Music CD/ Audio File Listening & Video File/ Picture File Watching Movie Menu Control (Disc) Movie Menu Control (Disc) Selects an option from the Movie Menu. Display the playback screen See <Operation on the Playback Screen of Visual Sources> (page 19). Display the Menu Control screen Operation on the Menu Control screen... -
Page 33: Ipod Control
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Playback Screen Playback Screen Easy Control Screen Easy Control Screen... -
Page 34: Source Control Screen
iPod Control Source Control Screen Source Control Screen Switches to the source control screen to use various playback functions. Display the Source Control Screen See <How to Display the Source Control Screen> (page 18). Operation on the Source Control [3] Plays. Screen Dragging [3] left or right changes the playing position. -
Page 35: Ipod List
⁄ 2 Returns to the Source Control screen. ] When appears, the text display Disabled when VIDEO is being played. is scrolled by touching it. • [Hand] – In the iPod Control by Hand Mode, iPod ALL] Lists all the music in the cannot be operated using this unit. -
Page 36: Ipod Album Artwork
iPod Control Select a song iPod Album Artwork iPod Album Artwork Searches for songs in an album artwork in iPod. Display the Source Control Screen See <Source Control Screen> (page 34). Display the iPod artwork Screen 1 Plays the touched song. 2 Returns to the Source Control screen. -
Page 37: Radio Listening
Radio Listening Various control screens appear in the Tuner Source mode. • Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch> (page 96). Multi Function Source Control Screen Source Control Screen Switches to the source control screen to use various functions. -
Page 38: Preset Select
Radio Listening [4Line]/ [2Line] Switches Auto Memory Auto Memory FM FM the number of lines displayed in the Stores stations with good reception in Information Display. memory automatically. [LO.S] Turns the Local Seek FM FM Display the Source Control Screen function ON or Off. See <Source Control Screen>... -
Page 39: Manual Memory
Manual Memory Manual Memory Radio Text Radio Text Stores the current receiving station in You can display the radio text. (Only when memory. receiving the FM broadcast) Display the Source Control Screen Select a station See <Source Control Screen> (page 37). See <Source Control Screen>... -
Page 40: Traffic Information
Radio Listening Traffic Information Traffic Information Search by Program Type Search by Program Type When a traffic bulletin starts, any source is A program is tuned when you set its switched to the traffic information and it is program type. (Only when receiving the displayed automatically. -
Page 41: Tv Watching
TV Watching Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. Easy Control Screen Easy Control Screen Function During TV Screen Function During TV Screen Displays the basic operation buttons on Basic functions are available even when the screen. -
Page 42: Source Control Screen
TV Watching Source Control Screen Source Control Screen [1/2] Switches the multi function display. Switches to source control screen to use ] Closes the multi function bar. various functions. [P1] – [P6] When [P1] to [P6] buttons Display the Source Control Screen appear, you can recall channels on See <How to Display the Source Control memory. -
Page 43: Tv Menu (Only With Ktc-D500E (Optional Accessory) Connected)
TV Menu (only with KTC-D500E TV Menu (only with KTC-D500E Auto Memory Auto Memory (optional accessory) connected) (optional accessory) connected) Stores stations with good reception in memory automatically. Menu Control screen appears by touching the area shown below. Display the Source Control Screen Display the TV screen See <Source Control Screen>... -
Page 44: Manual Memory
TV Watching Manual Memory Manual Memory Preset Select Preset Select Stores the current receiving channel in Lists and selects memorized station. memory. Display the Source Control Screen Display the Source Control Screen See <Source Control Screen> (page 42). See <Source Control Screen> (page 42). Start Preset Select Select a station you wish to store in memory... -
Page 45: Bluetooth Audio Control
Bluetooth Audio Control You can listen to audio files stored in a Bluetooth audio player or cell-phone. Before Use Before Use Source Control Screen Source Control Screen • For details on the Bluetooth Audio player which Switches to control screen to use various can be connected, see <About the Bluetooth functions. -
Page 46: Voice Control (Dnx9260Bt Only)
Voice Control (DNX9260BT only) The unit is equipped with Advanced Speech Recognition function which allows you to operate it with your voice. The supported languages are US English, UK English, French, German, Dutch, Italian, and Spanish. For information on the voice commands, refer to <Voice command table>... - Page 47 • The voice control is canceled if no operation is continued for a certain period of time. DDX series DDX8026BT English...
-
Page 48: Other Functions
Other Functions External Device Power Supply External Device Power Supply Muting Audio Volume upon Muting Audio Volume upon Control Control Reception of Phone Call Reception of Phone Call Controlling the external device power When a telephone call is mode or supply. -
Page 49: Screen Control
Screen Control Setting the monitor screen. Screen Control Screen Control "OFF": The display doesn’t dim. "SYNC": Turning the Dimmer function Display the Easy Control Screen On or Off when the vehicle light See <Operation on the Playback Screen control switch is turned On or Off. of Visual Sources>... -
Page 50: Hands Free Unit Control
Hands Free Unit Control Various functions can be used in the Hands Free control mode. of characters.) Before Use Before Use • Depending on the type of your cell-phone, the • For details on the Bluetooth cell-phone with the following restrictions are placed: hands-free function, see <About the Cell-Phone>... -
Page 51: During A Call
During a Call During a Call Making a Call Making a Call Displaying the control screen and using various functions. Display the Hands-Free Control screen ] Switches the voice output Select a dialing method between phone and speaker. [DTMF] Outputs dial tone. See <Controlling Tone-based Services>... -
Page 52: Calling By Phonebook
Hands Free Unit Control Outgoing Calls] Displays the Calling by Phonebook Calling by Phonebook Outgoing Calls screen. See <Making a You can call a person using his/her phone Call Using Call Records> (page 54). number that you have registered in the Incoming Calls] Displays the Phonebook. -
Page 53: Calling By Entering A Phone Number
Select the phone number to call Calling by Entering a Phone Calling by Entering a Phone Number Number Makes a call by entering a phone number. Display the Hands-Free Control screen See <Making a Call> (page 51). Display the number input screen Make a call ⁄... -
Page 54: Making A Call Using Call Records
Hands Free Unit Control Making a Call Using Call Records Making a Call Using Call Records Calling by Voice Recognition Calling by Voice Recognition (DNX7/ DDX8 series) (DNX7/ DDX8 series) Calls by selecting a phone number from the outgoing, incoming, or missed calls list. Calls by recognizing the registered voice. - Page 55 ■ If there are more than one phone Make a call numbers registered under the same name, go to step 7. Select a Phone number category ■ If there is more than one phone number assigned under the registered name Say the key word registered for the category Selects the Phone number category.
-
Page 56: Controlling Tone-Based Services
Hands Free Unit Control Controlling Tone-based Services Controlling Tone-based Services Setting Up the Hands-Free Phone Setting Up the Hands-Free Phone Uses tone base service using DTMF (Dual The Hands-Free system can be set as Tone Multi Frequency). follows. Display the Talking screen Display the Hands-Free Control screen See <Calling by Entering a Phone... -
Page 57: Voice Registration (Dnx7/ Ddx8 Series)
[Call Beep] Sets the beep of the Voice Registration Voice Registration incoming call. ( "ON") (DNX7/ DDX8 series) (DNX7/ DDX8 series) "ON": Beep is heard. Registers voice for voice recognition "OFF": Beep is canceled. in Phonebook. Up to 35 voices can be [SMS Receive Beep] Sets the beep of recorded in one cell-phone. -
Page 58: Key Word Voice Registration (Dnx7/ Ddx8 Series)
Hands Free Unit Control Say the name to register (2nd try) Key Word Voice Registration Key Word Voice Registration Say within 2 seconds after the Beep. (DNX7/ DDX8 series) (DNX7/ DDX8 series) Registers the voice to select the Phone End voice registration number category by Voice Recognition. -
Page 59: Phone Number Preset
Display voice registration screen Phone Number Preset Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. Display the Hands-Free Control screen Say the phone category to register See <Making a Call> (page 51). (1st try) Select the Preset number to register Say within 2 seconds after the Beep. -
Page 60: Sms (Short Message Service)
Hands Free Unit Control [Direct Number] Registers by entering Select a function phone numbers. [Voice] Registers voice for voice recognition to preset number. (DNX7/ DDX8 series only) [Memory] Registers the currently displayed phone number. [Delete] Deletes the currently displayed phone number. Touch to display the ] Displays the SMS Create Menu confirmation screen. - Page 61 SMS Message screen Display the Create SMS Message screen SMS] Creates a new message for the selected message. Create a message Create a message Input the destination 1 Enters characters. [2], [3] Moves the cursor. [5], [∞] Scrolls up or down the ] Select a destination from the character button display.
-
Page 62: Audio Control
Audio Control Item Page Audio Control Menu Audio Control Menu [Position] Displays the Audio Control menu to set the [Surround Control] sound effect function of this unit. Display the Source Control Screen Audio Control Audio Control You can adjust the front/rear and right/left audio balance. -
Page 63: Equalizer Control
⁄ reduced the volume using the "Volume Offset", the sound generated if you suddenly • [iPod] switch to another source may be extremely During iPod source only. loud. [EQ] Displays the Graphic Equalizer [Subwoofer Level] Adjusts the setup screen. (page 63) subwoofer volume. -
Page 64: Zone Control
Audio Control Set the Graphic Equalizer Zone Control Zone Control DNX9/ DDX8 series You can set the front and rear audio source. Display the Zone Control screen > > > > Touch [ [Zone Control]. (page 62) Set the Zone Control DNX7 series 1 Gain level can be adjusted by touching the each frequency bar. -
Page 65: Space Enhancer (Dnx7 Series)
- There is no output from the subwoofer or Listening Position Listening Position center speaker. You can adjust the sound effects according - "Subwoofer Level", "Bass Boost", and "Supreme" to your listening position. of <Audio Control> (page 62) is not available. - <Equalizer Control>... -
Page 66: Srs Wow Control (Dnx9/ Ddx8 Series)
Audio Control • Only the adjusted distance of position setup Finely adjust the value set with the (Position and Position DTA values) is stored in Position function. memory. Therefore, the final adjustment distance changes if you change the Car Type Set Up value SRS WOW Control SRS WOW Control (page 87). -
Page 67: Surround Control (Dnx9/ Ddx8 Series)
⁄ ⁄ • FOCUS: Adjusts the vertical position of the • When you have selected the TV or TUNER source speaker and sound image by virtual and when you set the Dolby PL, we recommend adjustment. you to select the "Dolby PLII Matrix" mode. If you •... -
Page 68: Setup Menu
Setup Menu You can set up various receiver parameters. ⁄ How to Display SETUP Menu Screen How to Display SETUP Menu Screen • [AV-IN SETUP], [Navigation] and [Audio SETUP] Displays the Setup menu to set various options can be locked. The key mark ( ) is functions. -
Page 69: Divx Setup
DivX Setup DivX Setup Cancel the registration Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). Display the DivX Setup screen > > > > Touch [ [DivX(R) SETUP]. (page 68) Touching the screen displays a confirmation message. -
Page 70: User Interface
Setup Menu User Interface User Interface "V.OFF": Press the [AUD] button for longer than 1 second to turn the You can setup user interface parameters. display off. Display the User Interface screen "CAM": Press the [AUD] button for > > >... -
Page 71: Touch Panel Adjustment
[Enter] Determines the selected Touch Panel Adjustment Touch Panel Adjustment language. You can adjust the touch panel operations. [Cancel] Cancels the selected language. Display the Touch panel Adjustment screen When [ASR] is set to "Disabled" (DNX9 > > > > >... -
Page 72: Clock And Date Setup
Setup Menu Clock and Date Setup Clock and Date Setup Security Setup Security Setup You can adjust the clock time. You can set a security code to protect your receiver system against theft. Display the Clock Setup screen ⁄ > > >... -
Page 73: Monitor Angle Control
Enter a security Code You must enter the same security code as that you have entered in Step 4. Register your security code Now, you can use your Receiver. Input four-digit number. Monitor Angle Control Monitor Angle Control You can adjust the position of the monitor. Register your security code Display the Angle Setup screen >... -
Page 74: Ext Sw Setup
Setup Menu EXT SW Setup EXT SW Setup [Pulse Set] Sets the Pulse signal output time. Sets up the exteral switch power mode. Outputs 500ms when "1" is set. Display the EXT SW screen Increases by 200ms with each step. Up >... -
Page 75: Setup Memory
Setup Memory Setup Memory [Clear] Clears the currently memorized settings. Audio Control, AV-IN SETUP, AV Interface, Navigation, and Audio SETUP settings can Memorize or recall the settings be memorized. The memorized settings When memorizing the Audio Setup and can be recalled at any time. For example, AV Interface settings: even when the settings are cleared due to replacement of the battery, the settings... -
Page 76: Changing Background Image
Setup Menu Changing Background image Changing Background image Select the image to load Loads an image from the connected SD/ USB device and sets it for the background image. Connect the device which has the image to load Display the Background screen >... -
Page 77: Panel Color Coordinate
• The [Memory] button on the “Background” screen Panel Color Coordinate Panel Color Coordinate becomes active only in STANDBY source mode. DNX9/ DDX8 series : Sets the button • Pressing the [Memory] button on the illumination color. “Background” screen switches the AV OUT source DNX7 series : Sets the screen and button to OFF. -
Page 78: Screen Control
Setup Menu To register your original color Screen Control Screen Control Start the RGB coordinate You can adjust the screen mode of the monitor. Display the Screen Control screen > > > > > > Touch [ [Display] [Screen Control]. (page 68) Adjust each color value Set each item 1 Selects a preset number to register. -
Page 79: Registering Bluetooth Unit
Registering Bluetooth Unit Registering Bluetooth Unit Display the PIN Code Set screen Registers the Bluetooth unit to be connected. Display the Bluetooth Setup screen > > > > Touch [ [Bluetooth SETUP]. (page 68) Display the Connect Device List screen 1 Display the PIN Code. - Page 80 Setup Menu Select the Bluetooth unit to register Confirm whether to register 1 Displays the searched Bluetooth unit. Returns to the Connect Device List screen. ⁄ ⁄ • Only models in Bluetooth unit name list can • You can also register from the Bluetooth unit be registered.
-
Page 81: Registering Bluetooth Unit Pin Code
Registering Bluetooth Unit PIN Registering Bluetooth Unit PIN Display the Connect Device List screen Code Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. Display the Bluetooth Setup screen >... -
Page 82: Bluetooth Hands-Free/Audio Output Setup
Setup Menu Bluetooth Hands-Free/Audio Bluetooth Hands-Free/Audio AV Input Setup AV Input Setup Output Setup Output Setup You can set AV input parameters. Selects speakers to output the sound of Display the AV-IN Setup screen hands-free phoning (such as phone call >... -
Page 83: Av Output Interface Setup
AV Output Interface Setup AV Output Interface Setup Camera Setup Camera Setup You can set AV output parameters. You can set Camera parameters. Display the AV-OUT Interface screen Display the Camera Setup screen > > > > > > > > Touch [ [AV-OUT Touch [... -
Page 84: Navigation Setup
( "ON") When turned "ON", the volume level drops for voice guidance. [Navigation Input] Selects a navigation system connection. ( "RGB") (DDX series only) "RGB": Allows the Kenwood’s Navigation System to connect via its interface cable. DNX series DNX9260BT/ DNX7260BT... -
Page 85: Dsp Bypass Control (Dnx7 Series)
"AV-IN": Allows a third-party navigation DSP Bypass Control (DNX7 series) DSP Bypass Control (DNX7 series) system to connect via the AV INPUT1 Temporarily bypassing DSP (Digital Signal port. Processor) System. "OFF": Must be used if no navigation Display the Audio SETUP screen system is connected. -
Page 86: Speaker Setup
Setup Menu Speaker Setup Speaker Setup Select a speaker type You can select a speaker type and its size to get the best sound effects. Display the Speaker Select screen > > > > Touch [ [Audio SETUP] > > [Speaker Select]. -
Page 87: Car Type (Dta) Setup
Crossover Network Setup [LPF FREQ] Low Pass Filter adjustment. You can set a crossover frequency of (When Subwoofer is selected on speakers. Speaker Select screen) [Slope] Sets a crossover slope. Select the speaker to set the crossover Car Type (DTA) Setup Car Type (DTA) Setup You can setup the car type and speaker network, etc. - Page 88 Setup Menu Speaker Location setup Car Type Adjust You can manually set the sound output Display the Speaker Location Setup timing of each channel. screen Display the Car Type Adjust screen Set the speaker locations Select a speaker you wish to adjust [Front Speaker] Sets the location of the 1 Center speaker (DNX9/ DDX8 series) front speaker.
-
Page 89: Channel Level (Dnx9/ Ddx8 Series)
sitting in the front seat, and set the Channel Level (DNX9/ DDX8 series) Channel Level (DNX9/ DDX8 series) right and left positions to the center of You can set the volume at each setup the vehicle interior. position. 2 Measure the distances from the Display the Car Type Setup screen reference point to the speakers. -
Page 90: Dvd Setup
Setup Menu DVD Setup DVD Setup a Dolby Digital software. The operation is available during the You can set up the DVD play. play stop mode. Display the DVD Setup screen [Angle Mark] Sets an angle mark > > > > Touch [ [DVD SETUP]. -
Page 91: Dvd Parental Level Setup
Select the language item to set DVD Parental Level Setup DVD Parental Level Setup Sets a parental level. Display the DVD Setup screen > > > > Touch [ [DVD SETUP]. (page 68) Display the Parental Level code number screen Enter a language code See <DVD Language Codes>... -
Page 92: Disc Setup
Setup Menu Display the Parental Level SETUP Disc Setup Disc Setup screen Performs setup when using disc media. Display the DVD Setup screen > > > > Touch [ [DVD SETUP]. (page 68) Select a parental level and complete Display the Disc Setup screen the setup Selects a parental level. -
Page 93: Usb/ Sd Setup
⁄ USB/ SD Setup USB/ SD Setup • [CD Read] Performs setup when using USB or SD. Disabled when a disc is in the unit. Display the USB/ SD Setup screen You cannot play an Audio file/VCD disc in the >... -
Page 94: Ipod Setup
Setup Menu iPod Setup iPod Setup Tuner Setup Tuner Setup Performs setup when using iPod. You can set Tuner related parameters. Display the iPod Setup screen Display the Tuner Setup screen > > > > Touch [ [iPod SETUP]. > > >... -
Page 95: Tv Setup
TV Setup TV Setup The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) Display the TV SETUP screen > > > > Touch [ [TV SETUP]. (page 68) Set each item [On Screen TV] Sets an on-screen display of the TV screen. -
Page 96: Remote Controller
Remote Controller This unit can be operated using the Remote Controller supplied with this unit. ¤ CAUTION • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. -
Page 97: Common Operations (Aud Mode)
TV mode Rear volume control This is switched when controlling TV. Adjusts volume at rear when the Dual Zone function is ON. NAV mode This is switched when controlling Navigation unit. ⁄ • The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD NAV/ V.SEL mode)". -
Page 98: Dvd/Vcd (Dvd Mode)
Remote Controller DVD/VCD (DVD mode) DVD/VCD (DVD mode) VCD 1.X, VCD 2.X (PBC OFF) Track number Track search and file search Cancel Selects the track or file to be played. VCD 2.X (PBC ON) Scene number Number Cancel Play/Pause Pauses the track. Once you have switched to the direct Press again to resume playing. - Page 99 DVD Menu Displays the DVD menu. Turns the playback control on or off while playing VCD. SUBTITLE Switches the subtitle language. ZOOM Switches the zoom ratio each time you press this key. Picture Angle Switches the picture angle each time you press this key.
-
Page 100: Ipod (Aud Mode)
Remote Controller Music CD/Audio file/Video file/ Music CD/Audio file/Video file/ search feature, specify the search number from the numeric keypad, and then press Picture file (AUD mode) Picture file (AUD mode) [38] key. Folder search Numeric keypad Selects the folder to be played. •... -
Page 101: Radio (Aud Mode)
Radio (AUD mode) Radio (AUD mode) Example: 810kHz (AM) FM band switching « Switches to bands received by the unit. Numeric keypad AM band • To use preset tuning, press the number of a programmed broadcast station. – Station selection •... -
Page 102: Navigation (Nav Mode)
Remote Controller Navigation (NAV mode) Navigation (NAV mode) ROUTE M Displays Route Option menu. Cursor key Scrolls the map, or moves the cursor. VIEW Switches between 2D and 3D map displays. ENTER Performs the selected function. VOICE Plays Voice guidance. ZOOM Zooms in or out the navigation map. -
Page 103: Tv (Tv Mode)
TV (TV mode) TV (TV mode) Switching Band/Video It switches between the station of the TV band to receive and video input. Channel Selection The TV channel to receive is selected. Direct tuning (NTSC TV type only) Press this key first, and then specify the station to receive with the numeric keypad. -
Page 104: Initial Setup
Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. End initial setup Initial Setup Initial Setup Turns the power On Set each item ⁄ • The settings above can be changed in <Setup Menu>... -
Page 105: Status Bar Indicator Items
Status bar Indicator items Source Shown below is a list of indicators Display Overview displayed on the Status bar. "MUSIC" Identifies the music file. "VIDEO" Identifies the video file. "RDM" Indicates that the Random function is ON. "A-RDM" Indicates that the Album random function is ON. "REP"... -
Page 106: Dvd Language Codes
DVD Language Codes Code Language Code Language Code Language Afar Interlingue Russian Abkhazian Inupiak Kinyarwanda Afrikaans Indonesian Sanskrit Amharic Icelandic Sindhi Arabic Italian Sangho Assamese Japanese Serbo-Croatian Aymara Javanese Singhalese Azerbaijani Georgian Slovak Bashkir Kazakh Slovenian Byelorussian Greenlandic Samoan Bulgarian Cambodian Shona Bihari... -
Page 107: Help? Troubleshooting
Help? Troubleshooting Some functions of this unit may be disabled What might seem to be a malfunction in by some settings made on this unit. your unit may just be the result of slight misoperation or miswiring. Before calling • Cannot set up the subwoofer. service, first check the following table for •... -
Page 108: Help? Error
The disc player is malfunctioning. ➡ Eject the disc and try inserting it again. "No Music" : Contact the Kenwood dealer if this indicator The connected USB device contains no continues blinking or the disc cannot be playable audio file. - Page 109 "No Navigation" (DDX series only): This unit does not support the connected navigation unit. ➡ The latest information on the connectable navigation unit can be obtained from http://www.kenwood.com/cs/ce. No navigation unit is connected. ➡ Connect a supported navigation unit. DDX series DDX8026BT English...
-
Page 110: Specifications
Specifications Disc Format Monitor section Monitor section : DVD-Video/ VIDEO-CD/ CD-DA Picture Size Sampling Frequency : 6.95 inches (diagonal) wide : 44.1/ 48/ 96 kHz : 156.6 mm (W) x 81.6 mm (H) Quantifying Bit Number Display System : 16/ 20/ 24 bit : Transparent TN LCD panel Drive System USB interface section... - Page 111 Bluetooth section Bluetooth section MW tuner section MW tuner section Technology Frequency Range (9 kHz) : Bluetooth Ver.2.1 + EDR Certified : 531 kHz – 1611 kHz Frequency Usable Sensitivity : 2.402 – 2.480 GHz : 25 μV Output Power : +4dBm (MAX), 0dBm (AVE), Power Class2 Audio section Audio section...
- Page 112 Specifications DSP Section DSP Section Navigation section (DNX series Navigation section (DNX series only) only) Graphics equalizer DNX9/ DDX8 series Receiver Band: 13 Band : High-sensitivity GPS receiver Frequency (BAND1 – 13) Reception Frequency : 62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/ : 1575.42 MHz (C/A code) 2.5k/ 4k/ 6.3k/ 10k/ 16k Hz Acquisition Times...
- Page 113 Specifications subject to change without notice. Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light incorrectly. DDX series DDX8026BT English...
- Page 114 Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners.
- Page 115 This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful infl uence on the environment.
- Page 116 1999/5/CE. Eesti Español Sellega kinnitab Kenwood, et see DNX9260BT, DNX7260BT, DDX8026BT Por medio de la presente Kenwood declara que el DNX9260BT, DNX7260BT, vastab direktiivi 1999/5/EC põhilistele nõudmistele ja muudele DDX8026BT cumple con los requisitos esenciales y cualesquiera otras asjakohastele määrustele.