Tuner Setup; Tv Setup - Kenwood DNX9280BT Instruction Manual

Tuner Setup

You can set Tuner related parameters.
1 Display the Tuner Setup screen
>
Touch [ ] [
68)
2 Set each item
[NEWS] Sets a news bulletin interrupt time.
( "OFF")
[AF]*
1
When station reception is poor,
automatically switches to the station that is
broadcasting the same program over the same
Radio Data System network. (
[Regional]*
1
Sets whether to switch to the
station only in the specific region using the "AF"
control. ( "ON")
[Auto TP Seek]*
1
When traffic information station
reception is poor, automatically searches for a
station that can be received better. (
[Language Select] Selects a display language for
the PTY function.
( "English (en)")
⁄
* Only when receiving the FM broadcast.
1
>
] [TUNER SETUP]. (page
"ON")
"ON")

TV Setup

The TV signal receiving areas can be set. (with the
optional accessory TV Tuner connected only)
1 Display the TV SETUP screen
>
Touch [ ] [
2 Set each item
[On Screen TV] Sets an on-screen display of the
TV screen.
( "Auto") (with the optional accessory TV tuner
connected only)
"Auto": Information is displayed for 5 seconds
when updated.
"OFF": Does not display any information.
3 Setting up TV (only with KTC-V301E/ KTC-
V300E (optional accessory) connected)
Example : TV1 Area screen
Sets the present TV1 or TV2 receiving area.
>
] [TV SETUP]. (page 68)
83
English