Channel Level; [Channel Level] - Kenwood DNX9280BT Instruction Manual

3 Set a delay time
Make fine adjustment of the delay time of the
speaker output specified at <Setup the Car Type>
to have a more suitable environment for your
vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
150cm
+100cm
50cm
80cm
+70cm
+0cm

Channel Level

You can set the volume at each setup position.
1 Display the Car Type Setup screen
>
Touch [ ] [
[Channel Level]. (page 60)
2 Select a speaker you wish to adjust
1
2 3
4 5
6
1 Center speaker
2 Left front speaker
3 Right front speaker
4 Left rear speaker
5 Right rear speaker
6 Subwoofer
[Test Tone] Starts or stops test signal tone output
for setup check.
3 Adjust the volume
> >
] [Audio SETUP]
67
English