Equalizer Control; Graphic Equalizer Setup - Kenwood DNX9280BT Instruction Manual

Equalizer Control

You can set up the equalizer.
1 Display the Equalizer screen
>
Touch [ ] [
2 Select EQ curves
[Natural], [Rock], [Pops], [Easy], [Top40], [Jazz],
[Game], [iPod], [User]
Selects an equalizer curve type.
You can select any of the following equalizer
curves.
⁄
• [iPod]
During iPod source only.
[EQ] Displays the Graphic Equalizer setup screen.
(page 61)

Graphic Equalizer Setup

You can Manually set the equalizer curve.
1 Display the Equalizer screen
>
Touch [ ] [
2 Display the Graphic Equalizer screen
⁄
• When "iPod" is selected in <Equalizer Control>, the
[EQ] button is deactivated. "iPod" uses its equalizer
function.
>
] [Equalizer]. (page 60)
>
] [Equalizer]. (page 60)
3 Select the channel to be adjusted
[F] Front speaker
[R] Rear speaker
[C] Center speaker
4 Set the Graphic Equalizer
1
1 Gain level can be adjusted by touching the
each frequency bar.
[2], [3] Sets a frequency.
[5], [∞] Sets a gain level.
[EQ INIT] Returns to the previous level which the
gain level is adjusted.
[Flat] Tone curve becomes flat.
[Bass EXT] Bass Extend settings.
When turned on, the frequency lower than 62.5
Hz is set to the same gain level as 62.5Hz.
[SW Level] Adjusts the subwoofer volume.
The setting is available when subwoofer is set
to any item other than "None". See
Setup> (page 65).
<Speaker
Next page 3
61
English