Source Control Screen Descriptions - Kenwood DNR876S Instruction Manual

Source control screen
descriptions
There are some functions which can be
performed from most screens.
Indicators
5
6
7
1 2
Navigation information
Short-cut source icons
All sources icon
1
Displays the source selection screen. (P.14)
Secondary screen
2
• [ ] [ ] : The Secondary screen changes to
/
another one every time you touch it. You can
also change the Secondary screen by flicking
left or right on the screen.
• Indicators: Displays the current source
condition and so on.
– [ATT]: The attenuator is active.
– [DUAL]: The dual zone function is active.
– [MUTE]: The mute function is active.
– [LOUD]: The loudness control function is active.
• Navigation information: Displays the current
location and the direction. The screen changes
to the navigation screen when you touch here.
• Short-cut source icons: The source changes to
the one you have set with a short-cut. For the
short-cut setting, refer to Customize Short-
cut source icons on HOME screen (P.16).
Content list
3
Displays the track/file/station/channel list.
4
3
4
• Connected Bluetooth device information.
Artwork & information
5
You can select whether to display an artwork
and song information or only song information
in more detail.
Touching the artwork area switches to the VU
meter. (The Disc, USB, SD, iPod, Bluetooth audio
sources only)
Change the text size of song information smaller
when the "Small Audio Text" is set to "ON" in the
User Interface screen (P.90).
Function panel
6
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
Operation keys
7
You can operate the current source with these
operation keys. The available functions are
different depending on the source type.
Basic Operations
17
English