Av Output Interface Setup; Camera Setup - Kenwood DNX9280BT Instruction Manual

Setup Menu

AV Output Interface Setup

You can set AV output parameters.
1 Display the AV-OUT Interface screen
>
Touch [ ] [
(page 68)
2 Set each item
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port. (
⁄
• USB source cannot be selected when two iPods are
connected.
78
DNX9280BT
>
] [AV-OUT Interface].
"VIDEO1")

Camera Setup

You can set Camera parameters.
1 Display the Camera Setup screen
>
Touch [ ] [
68)
2 Set each item
[Rear Camera] Selects the type of rear camera to
use. ( "Other")
"CMOS-300": When the CMOS-300 with ID 1 set
is connected.
"Other": When the other camera is connected.
[R-CAM Interruption] Sets a method to switch
to the rear view camera video display. (
"ON": Switches to the rear view camera video
display when engaging the shift knob of car to
"Reverse" and then pressing the [AUD] button
for longer than 1 second.
"OFF": Switches to the rear view camera video
display, press the [AUD] button for longer than
1 second.
⁄
• The function of the [AUD] button needs to be
set to "CAM" in [AUD Key Longer than 1 Second]
beforehand.
[R-CAM Settings] Adjusts the CMOS-300 with ID
1 set. For details, see the option manual.
[Front Camera] Turn this setting on when the
CMOS-300 with ID2 set is connected. (
[F-CAM Settings] Adjusts the CMOS-300 with ID
2 set. For details, see the option manual.
>
] [Camera SETUP]. (page
"OFF")
"OFF")