Ipod Control; Playback Screen; Easy Control Screen - Kenwood DNX9280BT Instruction Manual

iPod Control

You can control and listen to Music(s)/Video(s) in your iPod by connecting an iPod to this unit with KCA-iP302
(optional accessory).
To connect the second iPod, use a KCA-iP102 (optional accessory).
When Connecting One iPod
Connect the iPod to the iPod2
terminal with a KCA-iP302.
When Connecting Two iPods
Connect the first iPod (iPod1) to
the iPod1 terminal with a KCA-
iP302.
Connect the second iPod (iPod2) to the
iPod2 terminal with a KCA-iP102.
To select the iPod you want to play, press the
[Device] button on the multifunction display.
⁄
• With iPod1, you can enjoy both the music and video.
• With iPod2, you can enjoy only the music.
• When iPod1 is disconnected, you cannot listen to the
iPod2's music. Connect iPod2 to the iPod1 terminal.

Playback Screen

Basic functions are available even when the
playback screen is displayed.
1 Display the Playback Screen
See <Operation on the Playback Screen of Visual
Sources> (page 18).
2 Operation on the Playback Screen
1
3
2
32
DNX9280BT
⁄
• Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
• When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
• If the played song is not a video content, "No Video
Signal" is displayed on the video screen.

Easy Control Screen

Displays the basic operation buttons on the screen.
1
2
4
1 Not effective
Touching this area during fast forwarding or fast
backwarding plays a source.
2 Displays Easy Control Screen.
3, 4 Selects the music/video.
\ Fast Forwards.
| Fast Backwards.
Display the Easy Control Screen
Operation on the Easy Control Screen
1
2
3
1, 2 Switches to the Playback Screen.
3 Displays the Source Control Screen.
[1], [¡] Fast Forwards or Fast Backwards.
[4], [¢] Music/Video Search.
[38] Plays or pauses.