Voice Control - Kenwood DNX9280BT Instruction Manual

Voice Control

The unit is equipped with Advanced Speech Recognition function which allows you to operate it with your
voice. The supported languages are US English, UK English, French, German, Dutch, Italian, and Spanish. For
information on the voice commands, refer to <Voice command table> (separate volume).
• ASR on the Language Setting screen should be set to "Enabled". See
Voice Control
1 Enter into the Voice control mode
Press the Push-To-Talk switch.
The buttons enclosed in a green square support
the voice control.
2 Speak the command
Speak the command. (Ex: Speak "Top Menu".)
You will hear a beep.
The screen has changed to the Top Menu screen.
You will hear a beep again.
<Language Setting> (page
3 Speak the command
Speak the command. (Ex: Speak "TUNER".)
You will hear a beep.
The screen has changed to the Tuner Control
screen.
You will hear a beep again.
4 Control the source with voice control
Repeat the same procedure as step 2 or 3.
For information on the voice commands, refer to
<Voice command table> (separate volume).
5 End the voice control mode
Press the Push-To-Talk switch.
⁄
• The voice control is disabled when
upper-right corner of the screen.
• The voice control is canceled when the screen is touched
or any of the buttons, except the [VOLUME] button, on the
front panel or the remote control unit is pressed.
• The voice control is disabled while talking on the phone
with hands-free.
• The voice control is canceled if no operation is continued
for a certain period of time.
70).
is displayed on the
45
English