Initial Setup; Camera Setup - Kenwood DNX9280BT Instruction Manual

Initial Setup

When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed.
Initial Setup
1 Turns the power On
2 Set each item
[Language] Select the language used for the
control screen and setting items. (page 70)
[Angle] You can adjust the position of the
monitor. (page 73)
[iPod AV Interface Use] You can determine the
use of iPod/AV-IN3 input terminal. (
"iPod": Select when connecting the iPod using
the KCA-iP302 for iPod.
"AV-IN3": Select to play an AV component
connected to the iPod/AV-IN3 input terminal.
[Color] Sets the button illumination color. (page
76)
[EXT SW] Set the controls for the external
devices. (page 73)
[Camera] Set the parameters for the Camera. See
<Camera Setup> (page
3 End initial setup
⁄
• The settings above can be changed in
(page 68).
90
DNX9280BT
"iPod")
78).
<Setup Menu>