Setting Up The Hands-Free Phone - Kenwood DNX9280BT Instruction Manual

Hands Free Unit Control

Setting Up the Hands-Free Phone

The Hands-Free system can be set as follows.
1 Display the Hands-Free Control screen
See <Making a Call> (page
2 Display the Hands Free Setup screen
3 Set each item
[Auto Response] Sets an automatic response
time to pick-up an incoming call. (
"OFF": This function can not use.
"0-99": Sets to calling ring time (second).
[Call Beep] Sets the beep of the incoming call.
( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[SMS Receive Beep] Sets the beep of the
incoming SMS. (
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list,
incoming calls list and missed calls list. (
"ON": Yes.
"OFF": No.
52
DNX9280BT
49).
"OFF")
"ON")
"ON")
[SMS Use] Sets the SMS function.
( "ON")
"ON": Use SMS function.
"OFF": SMS not available.
[Sort Order] Sorts the names in the phonebook.
( "Last")
[Echo Cancel Level] Adjust the level of echo
cancellation. ( "15")
[Microphone Level] Adjusts the sensitivity of the
microphone for a telephone call. (
[Noise Reduction Level] Reduce the noises
generated by surrounding environment without
changing the microphone volume. Adjust the
voice of caller when it is not clear. (
[Restore] Restores the Hands Free SETUP value
to the initial value.
⁄
• Either the time interval for automatic answer set on
this unit or the time interval set on the cell-phone,
whichever is shorter, takes effect.
"2")
"15")