Bluetooth Setup; Registering Bluetooth Unit - Kenwood DNX9280BT Instruction Manual

Bluetooth Setup

Registering Bluetooth Unit

Registers the Bluetooth unit to be connected.
1 Display the Hands-Free Control screen
2 Display the Bluetooth Setup screen
3 Search for a Bluetooth unit
4 Display the PIN Code Set screen
1
1 Display the PIN Code.
[ ] When the text is longer, the text display is
scrolled by touching it.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth unit.
[SP DEV] Registers a Bluetooth unit that cannot
be registered by normal register (pairing)
operation.
[PIN Code Set] Display the PIN Code Set screen.
⁄
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See <Bluetooth Unit Connection> (page
58).
56
DNX9280BT
5 Enter PIN code
1
1 Enters a code number.
[Enter] Enter the PIN code specified for the
Bluetooth unit to register.
This button will not be active until at least four
PIN code digits have been entered.
[Cancel] Cancels registration of PIN code.
[Clear] Clears the code number.
6 Select the Bluetooth unit to register
1
1 Displays the searched Bluetooth unit.
Returns to the Connect Device List screen.
⁄
• You can also register from the Bluetooth unit side.
For the PIN code necessary for registration, see
<Registering Bluetooth Unit PIN Code> (page
• If pairing cannot be done even when the PIN code is
correct, try <Registering Special Bluetooth Unit>.
57).