Sample Output 2 - HP C100/110 Owner's Manual

The Boot Console Interface
Displaying the Current Memory Configuration

Sample Output 2

The following sample shows the memory configuration table when a
memory SIMM has been improperly installed, or not installed in pairs. In
this example, there is only one SIMM installed in slot 4a. Note that now the
BAD MEMORY TABLE is displayed.
MEMORY INFORMATION
WARNING: Memory banks deallocated due to a SIMM size mismatch or a SIMM failure.
Refer to the ME command in the INFORMATION menu for error information.
DETAILED MEMORY CONFIGURATION TABLE
SPA GROUP SMC
--- ----- ---
0x00000000 0 0
1
2
3
0x04000000 1 1
3
Group 0 interleaved 4 ways over
Group 1 interleaved 2 ways over
BAD MEMORY TABLE
SMC SMC Status
--- ----------
1 Present
3 Present
Active, Installed Memory (bytes)
Deallocated Pages (bytes)
Available Memory (bytes)
Good Memory Required by OS (bytes):
Memory
HVERSION SVERSION
-------- ---------
0x0490 0x00000900
196
SMC Status Bank Bank Status
---------- ---- -----------
Configured 3 Configured
Configured 0 Configured
Configured 0 Configured
Configured 3 Configured
Configured 3 Configured
Configured 0 Configured
4 banks
2 banks
Bank Bank Status
---- ------------
1 Sizing Error
2 Sizing Error
:201326592 of Standard DRAM's
- 0
---------
:201326592
8151040
Size Slot/Sys Brd
---- ------------
16MB 0a/b
16MB 2a/b
16MB 0a/b
16MB 2a/b
64MB 1a/b
64MB 1a/b
SIMM Size Slot/Sys Brd
--------- ------------
0MB 4a/b
0MB 4a/b