Sample Ttgen Configuration File - HP 9000 Installation And Configuration Manual

Files, Utilities, and Daemons

Sample ttgen Configuration File

% cd /opt/acc/cfg
% /opt/acc/lbin/acc_bld_lpbk -t sample_header \
-o loopback.answ
% ttgen -o loopback.answ
* ttgen input file
#include "/opt/acc/cfg/ttgendefine"
ttgen
Configuration
System-name
Program-zlu
Terminal-zlu
Logical-Term
Physical-Term
Buffer-Pool
Logical-Size
Logical-Data
Queue-Limit
Transmit-Limit
Unack-Limit
Port-Limit
E1T1-Port-Limit 100000
Node-entry
Interface-Definition
76
Sample ttgen Configuration File
The /opt/acc/cfg/loopback.answ file is a sample ttgen configuration file.
The sample file is automatically created when the ACC product is
installed. The MUX-Definition statements in this file are created to
match the hardware that is installed on the system at the time the file is
created. In the case that the ACC multiplexer cards are moved within
the system after the product is installed, it may be necessary to either
manually modify the loopback.answ file, or to recreate the file to reflect
the new hardware location.
The file may be recreated by running:
Once the configuration file is created or modified, the ttgen utility must
be run to create a downloadable file:
loopback.tmem
The following is an example of a file created by the acc_bld_lpbk script
on a system that has two NIO ACC multiplexer cards, an 8-Channel and
a card installed:
"ACC ttgen File"
100
1000
800
800
3000000
252
10 X25CNT,0,X25CNT_LDSIZE
200
100
5000
20000
1
Appendix A