HP C100/110 Owner's Manual page 68

Using Your CD-ROM Drive
Operating the CD-ROM Drive
After a few moments the ioscan utility lists all of the SCSI I/O devices it could
find. If there is a SCSI CD-ROM drive in the list, that listing appears similar to
the following:
H/W Path
=======================================
2.0.1.2.0
If you are using HP-UX 10.0, enter the following at the prompt:
/usr/sbin/ioscan -d sdisk
After a few moments the ioscan utility lists all of the SCSI I/O devices it could
find. The list appears similar to the following:
H/W Path Class
============================================
bc
8 bc
8/12 ext_bus
8/12.0 target
8/12.0.0 disk
8/12.5 target
8/12.5.0 disk
8/12.6 target
8/12.6.0 disk
8/16 ba
8/16/5 ext_bus
8/16/5.2 target
8/16/5.2.0 disk
8/16/5.4 target
8/16/5.4.0 disk
8/16/5.6 target
8/16/5.6.0 disk
10 bc
10/12 ext_bus
10/12.4 target
10/12.4.0 disk
52
Description Status
cd-rom_drive ok(nnnnnnnn)
Description
I/O Adapter
GSC built-in Fast/Wide SCSI Interface
QUANTUM LPS1080WD
DEC DSP3210SW
DEC DSP3210SW
Core I/O Adapter
Built-in SCSI
TOSHIBA CD-ROM XM-4101TA
SEAGATE ST3600N
MICROP 2112
I/O Adapter
GSC add-on Fast/Wide SCSI Interface
SEAGATE ST31200W