Verifying The Dds Tape Drive Operation - HP C100/110 Owner's Manual

Using Your Digital Data Storage (DDS) Tape Drive
Operating the DDS Tape Drive

Verifying the DDS Tape Drive Operation

To verify that your workstation can communicate with the DDS-format tape
drive, if you are using HP-UX 9.05, enter the following:
/etc/ioscan -d scsi
After a few moments the ioscan utility returns a message similar to the fol-
lowing:
H/W Path
======================================
2.0.1.3.0
If you are using HP-UX 10.0, enter the following:
/usr/sbin/ioscan -d stape
After a few moments the ioscan utility returns a message similar to the fol-
lowing:
H/W Path
============================================
8
8/16
8/16/5
8/16/5.3
8/16/5.3.0
If ioscan does not see your tape drive it will return the following message:
ioscan: No hardware found
If you receive this message, go to Chapter 6, "Solving Problems."
72
Description Status
tape_drive ok(nnnnnnnnn)
Class
bc
bc
ba
ext_bus
target
tape
Description
I/O Adapter
Core I/O Adapter
Built-in SCSI
HP HP35480A