Setting The Monitor Type - HP C100/110 Owner's Manual

Setting the Monitor Type

Using the list in the example above, you can set the monitor type for graph-
ics slot3 by typing the following:
NOTICE: You can exit at this point by entering x, and the monitor type will not be
changed.
The screen displays the choice of supported monitors, similar to the follow-
ing. Follow the directions in the screen prompts and enter the monitor type
you want to configure (in this example, number 2).
MONITOR INFORMATION
Type
----
1
2
3
4
5
6
7
8
9
10
11
12
13
Enter monitor type selection from list above (or 'x' to exit):
Press <y> to save monitor type <x> to exit monitor selection:
Configuration Menu: Enter command >
Resolution Frequency
---------- ---------
1280x1024 72Hz
1024x768 75Hz
1024x768 70Hz
1024x768 75Hz
1280x1024 60Hz
1024X768 60Hz
640X480 60Hz
1280X1024 75Hz
1024X768 75Hz
800X600 75Hz
640X480 75Hz
1280X1024 72HZ
1280X1024 50HZ
2 1024x768
The Boot Console Interface
Displaying and Setting the Monitor Type
Flat Panel
VESA
VESA
VESA
VESA
GrayScale
75Hz
monitor graphics3
2
y
189