Removing A Cd-Rom Disc From A Vertically Mounted Drive - HP C100/110 Owner's Manual

Using Your CD-ROM Drive
Operating the CD-ROM Drive
Unloading a CD-ROM Disc in a Vertically Mounted Drive
Perform the following steps to unload a disc from the CD-ROM drive:
Figure 13
1 Press the eject button to eject the disc tray from the drive. If the drive is in use,
NOTICE: You must unmount the disc before eject it from the drive. Refer to the
subsection, "Unmounting a CD-ROM Disc Using SAM," for instruction on
unmounting a disc.
2 Press down gently against the spring tension of disc holders A and B and swing
3 Remove the disc from disc holders A and B.
4 To close the Disc Tray, push the front of the disc tray gently towards the drive
50

Removing a CD-ROM Disc From a Vertically Mounted Drive

you must press the eject button for more than one second to eject the disc tray.
The emergency eject feature allows you to eject the disc tray if the normal proce-
dure fails. See Table 5.
the top of the disc away from disc holder C as shown in Figure 13.
until it closes by itself.