Changing Your Workstation's Hardware Configuration
Installing Storage Devices
Configuring a Hard Disk Drive
This section describes how to add a hard disk drive to your system as a file
system using SAM. If you installed a new hard disk drive, follow these
instructions to make your new disk usable as a file system. For more infor-
mation about configuring a hard disk drive, refer to the System Administra-
tion Tasks manual.
This procedure requires you to log in as root. If you cannot log in as root,
contact your system administrator.
Log in as root.
1
Move the mouse pointer to the arrow above the Toolbox control and click
2
the left mouse button.
Toolbox Control Arrow
The Toolbox subpanel opens. Click on the General toolbox icon, shown
3
below.
136