System Overview
Important Information You Need to Note
3 Move the mouse cursor into the terminal window and single-click the left mouse
4 If you are using HP-UX 9.05, enter the following at the prompt:
You will see a table similar to Table 4.
Table 4
Sample LANSCAN COMMAND TABLE
Hardware
Station
Path
Address
2.0.2
0x0800091595EE 0
The LANIC ID in this example is 0800091595EE.
22
Terminal Control
A terminal window opens.
button.
/etc/lanscan
If you are using HP-UX 10.0, enter the following at the prompt:
/usr/sbin/lanscan
Dev Hard
ware
lu
State NameUnit State ID
UP
Net-Interface
NetMgt Encapsulation
lan0
UP
4
Methods
ETHER IEEE8023