Reading The Busy Light - HP C100/110 Owner's Manual

Highlight the disc you want to unmount and click on Remove a Hard
9
Disk Drive from the Actions menu.
A window with the following message opens:
10
Do you want to remove the disk?
Yes
Click on .
Press the eject button on the CD-ROM drive and remove the CD-ROM
11
disc from the disc tray.

Reading the Busy Light

The CD-ROM busy light shows the status of the drive during the self test
and during activity with the host system.
The CD-ROM drive performs the self test when one of the following hap-
pens:
You load a disc and close the Disc Tray.
•
You turn on the workstation with a disc already loaded in the CD-ROM
•
drive.
For the self test, the busy light operates in the following sequence:
Light On - The busy light goes on when the disc loads into the
1
drive.
Light Flashing - The light flashes six times while a read test is per-
2
formed on the disc.
Light Off - The light goes off when the self test is complete.
3
Using Your CD-ROM Drive
Mounting and Unmounting a CD-ROM Disc
59