HP C100/110 Owner's Manual page 49

23 Click on OK at the bottom of the Messages window.
The Printer/Plotter Manager window now lists your printer.
24 Move the cursor to the word List at the top of the Printer/Plotter Manager win-
dow and click the left mouse button.
25 A menu opens below the word List. Click on Exit.
The main SAM window becomes visible again.
26 In the main SAM window, click on Exit SAM.
The SAM window closes.
27 Double-click on the window menu button in the upper-left corner of the Toolbox
window. The window closes.
28 To test the printer, first create a terminal window by clicking the Terminal Con-
trol on the Front Panel as shown. Refer to Using Your HP Workstation for the
placement if the Terminal Control if you are using VUE Lite.
A terminal window opens.
29 Move the mouse cursor into the terminal window and click the left mouse button.
Setting Up a Local Printer Using SAM
Terminal Control
Setting Up Your Printer
33