Opening The System_Admin Toolbox; Executing The Sam Icon - HP C100/110 Owner's Manual

4 A file manager window appears with a number of icons in it. Double-click on the
Figure 5
5 Move the mouse cursor to the SAM icon shown below (your icon can look like
Figure 6
6 The System Administration Manager window opens. Double-click on Printers
7 The Printers and Plotters window opens. Double-click on Printers/Plotters.
8 From the Actions menu, click on Add Local Printer/Plotter.
9 Another menu opens. If your printer is connected to the parallel port on your
10 If you chose Add Parallel Printer/Plotter in the previous step, only one parallel
System_Admin toolbox icon.

Opening the System_Admin Toolbox

either of these) and double-click the left mouse button.

Executing the SAM Icon

and Plotters ->.
If your workstation doesn't have any printers set up, a message window opens.
Click on OK to remove it.
workstation, click on Add a Parallel Printer/Plotter.
If your printer is connected to one of the serial connectors on your workstation,
click on Add Serial (RS-232C) Printer/Plotter.
A window opens displaying the available parallel or serial interfaces.
interface will be listed. Place the mouse cursor on the listed parallel interface and
click the left mouse button.
Setting Up Your Printer
Setting Up a Local Printer Using SAM
31