Do Not Disturb; Activating The "Do Not Disturb" Function; Allowing "Do Not Disturb - Siemens OpenStage 60 User Manual

Step by Step
User
Configuration
Incoming calls
Handling
Allow DND

Do not disturb

If "Do not disturb" is activated, your telephone will not
ring. The caller hears the busy signal.
On multi-line telephones
activate the "Do not disturb" function for your pri-
mary line.
Prerequisite: A programmable sensor key must be as-
signed the function "DND" (Do Not Disturb)

Activating the "Do not disturb" function

S
Press the "Do not disturb" programmable sensor key.
T
The programmable sensor key blinks to signal incoming
calls. The caller hears the busy signal. Calls for pickup
groups are however connected.
R
To deactivate the "Do not disturb" function, press the lit
programmable sensor key again.
The "Do not disturb" function can also be activat-
ed during a call or deactivated when an incoming
call is being signaled using the programmable
sensor key.

Allowing "Do not disturb"

v
Press the key shown until the application's "Settings"
tab is active.
j
poss. Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Privacy/security
page 10 you can only
page 52.
91