Installing The Designation Card - Lucent Technologies 6400 Series User Manual

Installing the Designation Card

Included in the front of this user's manual is a button designation card on which
you can write the telephone number, extension, name, or feature that each call
appearance/feature button can access. In order to help you match the
designation cards with the call appearance/feature buttons on the voice
terminal, the columns of button labels are marked with the 6400 Series multi-
line telephone model with which the label can be used.
Below the perforated bottom edge of each designation card is a telephone
number card on which you can write your telephone number or extension.
To label and install the designation card and telephone number card
1. Print the numbers/features on the button designation card that
corresponds with the telephone you are using, and type or write your
phone number or extension on the telephone number card (labeled
Tel no.).
2. Crease the perforated edges of the cards you have filled out and then
tear the button designation strips and the station number card along
the perforations.
3. Place the button designation card and telephone number card under
the plastic card cover on the telephone by doing the following:
— The transparent designation card cover is attached to the frame of
the telephone by tabs on the top and bottom of the cover. Remove the
cover by pulling the top tab forward and then lifting the bottom of the
transparent cover from the voice terminal.
— Place the designation card(s) on the telephone and then replace the
transparent cover over the card by inserting the tabs at the bottom
and then pressing the top down until it clicks.
Note: You can order additional designation cards in quantities of 25 cards
and 100 cards per package. Use the following comcodes when you
place your order.
25 sheets of designation and telephone number cards:
Comcode: 847984614
100 sheets of designation and telephone number cards:
Comcode: 847984622
38