Using The Softkeys To Activate A Feature; (An Example) - Lucent Technologies 6400 Series User Manual

Using the Softkeys to Activate a Feature (an Example)
Your display and softkeys allow you to access up to 12 switch-related features.
For example, you may want to use the Priority Calling feature to call another
extension with a priority ring. You can activate this feature with the softkeys in
the following way:
To access a feature with the softkeys (Priority Calling is used in this
example)
1. Press the Menu button.
The display shows the initial softkey feature menu screen:
2. Press the Next button.
The display shows the second softkey feature menu screen:
3. To use the Priority Calling feature, press the softkey below PCall and
then dial the extension.
Note: When the feature is activated, after the display screen shows
you the digits you are dialing, an arrow appears above the
feature, as in the example below. If there is not an arrow above
the feature, the feature is off.
Note: When both parties hang up from the call, the arrow above PCall
(showing feature status indication) disappears.
Dir Drop
PCall AutCB Prog
PCall AutCB Prog
HFAns Timer
Pause
Pause
8