Lucent Technologies 6400 Series User Manual page 32

Directory
The Directory (display) feature allows you to search for the extension of
another user in your location by keying in the user's name at the dial pad.
To search the directory for a name
1. Press the Menu button and then press the softkey below Dir
OR, if Dir is not available on your display, press the
(if administered)
2. Key in the selected name with dial pad keys:
last name, comma (use
3. Press the Next button for each successive directory name you wish
to see.
4. To search for a new name, press the softkey below Dir or press the
button and go through the above sequence again.
Directory
5. When you are ready to exit the directory, press the Exit button.
To place a call to the name shown on the display
1. Pick up the handset.
2. While the name is shown, press the
administered)
OR, if you do not have a
button and then dial the number using the dial pad.
Note: You can also leave your handset on-hook. The speakerphone
will turn on automatically when you press
Exit
Use the Exit feature to leave Display Mode (after using any display or
softkey feature) and return to Normal Mode. You can then use the display
to view the time and date and to identify call appearance, calling/called
party, and calling/called number.
To exit a display feature and return to Normal (display) Mode
1. Press the Exit button.
Display will show the time and date or, when applicable, call/caller
information.
), first name or initial.
*
Call Disp
button on your set, press the Exit
Call Disp
28
button
Directory
button (if
.
Call Disp