Lucent Technologies 6400 Series User Manual page 38

a.
c.
FIGURE 7 Removing, Rotating, and Replacing the Handset Retainer
3. Place the telephone face down on a flat surface and turn the telephone
face down.
4. Remove the desktop stand which is attached to the base of the
telephone by tabs on the top and back of the stand. (These tabs are
shown as 1 and 7 in Figure 6. Figure 8 on the next page shows the
removal of the desktop stand. The upper tabs are labeled 1 and 2 in
the figure below.)
— Press inward on the top of the stand until you can lift the top of the
stand
out of the tab slot on the telephone.
— Lift the bottom of the stand out of the lower tab slot(s).
¾
b.
d.
34